Seems s this gets asked alot!
Parts from the mondeo.
Engine- 2.0Ltr 16v zetec series one or 2 (Will say DOHC on series 1 and zetec 16v on series 2) Needs to be the silver top type not black top!
ECU - Either of the following ECu's will work:
DESK - 93BB-12A650-ED
DEWY - 93BB-12A650-EE
DEEP - 93BB-12A650-EF
MAF- Some say you need to match the MAF to the ECU but i presonally dont have a matching MAF and ECU and it works fine.
Throttle body
Injectors
Oil pump- but only if you use the CVH oil filter
Parts to use from the fiesta (providing its a 16v zetec)
Loom
Inlet manifold- See N.B.
Exhaust Manifold- See N.B.
N.B. The Fiesta RS1800 would be better as there less restrictive than the 1.6 item.
Sump
Oil pick up pipe
Alternator
Starter motor
Flywheel
Dipstick tube
Power steering pump
Gearbox
Exhaust
TPS
throttle linkage and the cable retaining plate - Throttle body items
Reccomended new parts to buy
Cambelt and tensioners
head gasket See N.B.
Exhaust manifold Gasket See N.B.
Inlet manifold Gasket See N.B.
Rocker cover Gasket See N.B.
Sump Gasket See N.B.
N.B. A gasket set can useually be purchased which will work out cheaper than buying individaully
Spark plugs
HT leads
Water pump
Oil filter - if your using the mondeo oil pump you will need a CVH item as its shorter!
Oil
Antifreeze/coolant
