| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| BHP would a 2.0 gasflowed MAF sensor produce https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=9287 |
Page 1 of 1 |
| Author: | Fezzyzetec [ Wed Nov 14, 2007 8:18 pm ] |
| Post subject: | BHP would a 2.0 gasflowed MAF sensor produce |
so what do peeps think a 2.0 gasflwoed MAF would give in BHP |
|
| Author: | happypaul [ Wed Nov 14, 2007 8:22 pm ] |
| Post subject: | |
Why not ask a tuning company. |
|
| Author: | james_rs [ Wed Nov 14, 2007 8:31 pm ] |
| Post subject: | |
Probably 0.0000000000000000000000000000000000000000000000001% You cant say what bhp will x part give me. Every car is different, it also depends on the mods the car has got. If you really do want to know, get it RR'ed before and after. Youve got 170 bhp right? Surely thats enough. And this is in the wrong section. |
|
| Author: | Fezzyzetec [ Wed Nov 14, 2007 8:36 pm ] |
| Post subject: | maf |
not quitecooke i got 160 just wondered if any body ahd any experience dealing wiv things like that |
|
| Author: | xmadxmoex [ Wed Nov 14, 2007 9:08 pm ] |
| Post subject: | |
you wont get very much from it.. however, you may notice smoother throttle response and things like that |
|
| Author: | Ry [ Wed Nov 14, 2007 9:09 pm ] |
| Post subject: | |
Gasflowing products is worthless and wank compared to standard with 306's. Just a waste of money and nothing more. SO beware if it's even worth it or not. |
|
| Author: | scotty_boy BSc [ Thu Nov 15, 2007 12:08 am ] |
| Post subject: | |
| Author: | Mole259 [ Thu Nov 15, 2007 12:36 am ] |
| Post subject: | |
| Author: | happypaul [ Thu Nov 15, 2007 12:40 am ] |
| Post subject: | |
| Author: | Emlyn11 [ Thu Nov 15, 2007 2:52 am ] |
| Post subject: | |
| Author: | Fezzyzetec [ Thu Nov 15, 2007 10:23 am ] |
| Post subject: | true |
| Author: | mike2530 [ Fri Nov 16, 2007 8:41 pm ] |
| Post subject: | |
What everyone is forgetting it that between the MAF and the cylinder bores are the rough insides of the intake manifold which you cannot smooth, the insides of the intake pipe which unless you get an induction kit won't make a difference, also you won't have any BHP increase as you are not increasing the air flowinging through the sensor nor are you increasing the fuelling which you only do if you are increasing the air flow, both of which are essential for increased power. All you are doing is making a minimal smoothing of air which is not good. You need swirl to make the car mix and burn the fuel more efficiently. On that note people who are selling these are ripping people off like you guys who in the search of power are unfortunately being sucked into thinking this will increase your power. The BEST thing to do is go and spend money on things that really make a difference like mega squirt for instance which will give an increase on a 2.0 from 136 BHP with no mods to 150 BHP with no mods except the megasquirt. |
|
| Author: | james_rs [ Fri Nov 16, 2007 9:05 pm ] |
| Post subject: | |
| Author: | mike2530 [ Sat Nov 17, 2007 2:40 pm ] |
| Post subject: | |
| Author: | happypaul [ Sat Nov 17, 2007 5:19 pm ] |
| Post subject: | |
| Author: | Emlyn11 [ Sat Nov 17, 2007 10:17 pm ] |
| Post subject: | |
| Author: | dans sicksi [ Mon Nov 19, 2007 6:01 pm ] |
| Post subject: | |
| Author: | happypaul [ Mon Nov 19, 2007 7:11 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|