pm lowsi
he might be able to shed some light on the subject
**he did not do this himself, but know a rough idea of how his auto elect. did it
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| By passing the PATS https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=9286 |
Page 1 of 1 |
| Author: | RacingMick [ Wed Nov 14, 2007 7:13 pm ] |
| Post subject: | By passing the PATS |
As some of you may know, I use my Mk3.5 1.6 Si for competition use. As a weight reduction programme and to have less things go wrong, I have been removing all the unwanted electrical cables/wires i.e speakers, central locking, window motors etc I also want to remove all the PATS related wiring, question is can this be done? Can I by-pass the PATS? All positive help/advice would be greatly appreciated. Cheers Mick |
|
| Author: | SordFish [ Wed Nov 14, 2007 7:34 pm ] |
| Post subject: | |
yes the pats can be bypassed as its an external unit. I'm not going to post how to do it as this is a public forum, But with a copy of the wiring diagrams and few hours i think you could work it out. |
|
| Author: | xmadxmoex [ Wed Nov 14, 2007 7:36 pm ] |
| Post subject: | |
im sure it could somehow, my uncle re-built the loom on the focus he has and they use key fob immobilising thats more advanced than the Si PATS thought about taking the loom out and stripping it for what you need, IE bare essentials bin the stock ECU and go custom whilst your at it |
|
| Author: | RacingMick [ Wed Nov 14, 2007 10:54 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Wed Nov 14, 2007 11:08 pm ] |
| Post subject: | |
| Author: | RacingMick [ Tue Nov 20, 2007 9:52 am ] |
| Post subject: | |
| Author: | onslack [ Tue Nov 20, 2007 10:15 am ] |
| Post subject: | |
pm lowsi
he might be able to shed some light on the subject **he did not do this himself, but know a rough idea of how his auto elect. did it |
|
| Author: | lowsi [ Tue Dec 04, 2007 5:09 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Tue Dec 04, 2007 5:32 pm ] |
| Post subject: | |
| Author: | RacingMick [ Sat Dec 08, 2007 11:28 pm ] |
| Post subject: | |
Right, I am having a bloody nightmare working with the PATS to get my competition car up to spec. Could I get round not having the PATS by using a loom from an XR2i? What ECU would I have to use? Cheers Mick |
|
| Author: | xmadxmoex [ Sat Dec 08, 2007 11:45 pm ] |
| Post subject: | |
would be hard to do it that way, im sure you could do it that way somehow, depends if the 2i's had PATS |
|
| Author: | RacingMick [ Sun Dec 09, 2007 1:12 am ] |
| Post subject: | |
No, the XR2i doesn't have PATS which is way I thought it might be an option. Why would it be hard to do? Mick |
|
| Author: | xmadxmoex [ Sun Dec 09, 2007 12:11 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|