I emailed Samco before. They don't have a kit for the 1.6 Si. They sent me a pic of a kit to see if the pipes would fit, but for what you get out of it, it just wasnt worth buying.
Would need to be a custom job I'm afraid
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| si silicone hoses https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=917 |
Page 1 of 1 |
| Author: | Chalmers [ Wed Jun 15, 2005 12:49 pm ] |
| Post subject: | si silicone hoses |
Does anyone know of a company that does hose kits for the 1.6si or if another kit can be used Cheers. |
|
| Author: | EvilDes [ Wed Jun 15, 2005 12:52 pm ] |
| Post subject: | |
I emailed Samco before. They don't have a kit for the 1.6 Si. They sent me a pic of a kit to see if the pipes would fit, but for what you get out of it, it just wasnt worth buying. Would need to be a custom job I'm afraid
|
|
| Author: | Chalmers [ Wed Jun 15, 2005 2:04 pm ] |
| Post subject: | |
Has anyone had a custom job done and how much did it cost ? |
|
| Author: | EvilDes [ Wed Jun 15, 2005 2:24 pm ] |
| Post subject: | |
Im unsure of anyone I know who has had custom hoses made up, but in one of the recent mags (FF or PF), there was a silicone hose company who said that if they needed to make up some silicone hoses, it wouldnt be cheap, but if there was enough call, they could make it as a kit and get it produced properly. Not much help, but all you can do is contact them
|
|
| Author: | Paul [ Wed Jun 15, 2005 5:46 pm ] |
| Post subject: | |
spoke to a bloke at fitp who has used lengths of tubing and cut them to his own needs.. red hoses they were, think you can buy lengths of any.. he said where but i cant remember, try google for: engine bay hoses ? http://www.sfsperformance.co.uk/motorsp ... engths.htm http://www.sfsperformance.co.uk/ |
|
| Author: | jdfiesta [ Wed Jun 15, 2005 11:57 pm ] |
| Post subject: | |
wouldnt the rs1800 hose kit fit? i was looking into this myself the other day. JJ |
|
| Author: | EvilDes [ Thu Jun 16, 2005 12:00 am ] |
| Post subject: | |
Stick a pic of it up if you can find one JJ and we'll have a look and see if it will. It should do, after all its just a tuned zetec
|
|
| Author: | jdfiesta [ Thu Jun 16, 2005 12:13 am ] |
| Post subject: | |
| Author: | jdfiesta [ Thu Jun 16, 2005 12:14 am ] |
| Post subject: | |
| Author: | javablu [ Thu Jun 16, 2005 12:15 am ] |
| Post subject: | |
| Author: | jdfiesta [ Thu Jun 16, 2005 12:23 am ] |
| Post subject: | |
| Author: | Percy [ Thu Jun 16, 2005 12:45 pm ] |
| Post subject: | |
| Author: | Zetecfiesta [ Thu Jun 16, 2005 3:05 pm ] |
| Post subject: | |
| Author: | div_169 [ Fri Jun 17, 2005 5:11 pm ] |
| Post subject: | |
On the same sort of note, does this mean the hoses samco make for the xr2i 8v would fit the 1.4 8v Si as they are both CVH engines just with different capacities? |
|
| Author: | AndyBlack [ Wed Jun 22, 2005 4:19 pm ] |
| Post subject: | |
There is a guy selling some on fiestaturbo.com.. in black though.. Samco ones for Si.. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|