nah i think the anti roll bar is ok( if the beam has one) i think its where the suspension mounts
i think its to do with the diffent sizes
like i said i am not 100%, i will let someone else who is more technical than me explain
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Polybushes and rear beam/subframe https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=8705 |
Page 1 of 1 |
| Author: | fiestafletch [ Sat Sep 22, 2007 12:42 pm ] |
| Post subject: | Polybushes and rear beam/subframe |
My rear beam is very slightly bent, putting the camber out by 3 degrees. So Im gunna get a new rear beam and also going to polybush it whilst Im at it. But unsure wether to polybush the rear ARB whilst Im at it, anyone reckon its worth polybushing the rear ARB as well? One other question, everywhere I like has two prices for the bushes for the ARB, both say for a set of 4 20mm poly bushes, but the price for one set is £20 and the price for the other set is £60!?! Anyone know why and what the difference is? Any advice would be helpfull. Thanks in advance Fletch |
|
| Author: | onslack [ Sat Sep 22, 2007 3:01 pm ] |
| Post subject: | |
| Author: | fiestafletch [ Sat Sep 22, 2007 5:33 pm ] |
| Post subject: | |
| Author: | onslack [ Sat Sep 22, 2007 6:01 pm ] |
| Post subject: | |
| Author: | fiestafletch [ Sat Sep 22, 2007 6:43 pm ] |
| Post subject: | |
| Author: | onslack [ Sat Sep 22, 2007 6:51 pm ] |
| Post subject: | |
nah i think the anti roll bar is ok( if the beam has one) i think its where the suspension mounts i think its to do with the diffent sizes like i said i am not 100%, i will let someone else who is more technical than me explain
|
|
| Author: | fiestafletch [ Sat Sep 22, 2007 6:56 pm ] |
| Post subject: | |
ok cheers, yea I think you are right actually, as the suspension shims are slightly larger or something, thanks for the help! |
|
| Author: | fiestafletch [ Sat Sep 22, 2007 9:13 pm ] |
| Post subject: | |
Still Im pretty desperate to get one of these from a scrappy, so if anyone knows of whatever types of fiestas these will fit off please post up! |
|
| Author: | fiestasiphil [ Sat Sep 22, 2007 9:46 pm ] |
| Post subject: | |
yeh the xr2i, si, rs1800 and rst beams r the same but the rs1800 beam i have is slightly different to my si one the roll bar brackets a bit diff, but fits all the same 
|
|
| Author: | fiestafletch [ Sat Sep 22, 2007 11:30 pm ] |
| Post subject: | |
alright nice one for that, big help, gunna be a bit awkward to find one of them in the scrapyard lol! |
|
| Author: | Raymondo [ Sun Sep 23, 2007 4:20 pm ] |
| Post subject: | |
Al the rear bems will fit the same, but the non-arb ones wont have the holes tapped for the arb brackets. The ZS beam fits straight on, and you can use the drums. Ive just fitted one on mine so you could have the old beam but your miles away 
|
|
| Author: | fiestasiphil [ Sun Sep 23, 2007 4:31 pm ] |
| Post subject: | |
| Author: | fiestafletch [ Sun Sep 23, 2007 5:54 pm ] |
| Post subject: | |
actually just read through a guide by puretom, and the ZS beam fits and is a direct replacement! SO can be on the lookout for one of them as well. Are there any advantages of using a ZS beam, apart from the possibility of a rear disc upgrade??? Also, just a thought, would a rear beam of any mk 3.5 work? or is it only the xr2i ones, rs 1800, rs turbo and si ones that work? Might see if they do if I cant find anything else. |
|
| Author: | onslack [ Sun Sep 23, 2007 9:14 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Sun Sep 23, 2007 9:39 pm ] |
| Post subject: | |
| Author: | fiestafletch [ Sun Sep 23, 2007 9:57 pm ] |
| Post subject: | |
| Author: | fiestafletch [ Tue Sep 25, 2007 6:43 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Tue Sep 25, 2007 10:29 pm ] |
| Post subject: | |
| Author: | fiestafletch [ Tue Sep 25, 2007 11:09 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Tue Sep 25, 2007 11:23 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|