| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| rs accessory front bumper https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=8676 |
Page 1 of 1 |
| Author: | andywrc [ Tue Sep 18, 2007 6:43 pm ] |
| Post subject: | rs accessory front bumper |
| Author: | EvilDes [ Wed Sep 19, 2007 7:32 am ] |
| Post subject: | |
| Author: | andywrc [ Wed Sep 19, 2007 10:08 am ] |
| Post subject: | |
nope it dont have the 2 bolts, pics on there way now mate |
|
| Author: | andywrc [ Wed Sep 19, 2007 10:12 am ] |
| Post subject: | |
|
|
|
| Author: | xmadxmoex [ Wed Sep 19, 2007 10:39 am ] |
| Post subject: | |
i like that bumper!! should just go on as it is judging by the bolt patterns though 
looks like fiberglass though? |
|
| Author: | EvilDes [ Wed Sep 19, 2007 10:42 am ] |
| Post subject: | |
I can't really remember, but are there holes in the slam panel for those 3 mounts on either side? Looking at an old pic of mine, it doesn't look like it... 
Even if there were, I don't know if there'd be enough support for the middle of the bumper. Might be a bit loose when you put a bit of pressure on it. As for the foam backing, no you don't need it. Most, if not all, the fibreglass kits just get put on without it. |
|
| Author: | xmadxmoex [ Wed Sep 19, 2007 10:43 am ] |
| Post subject: | |
im 99.9% sure there are 3 holes in the front valance.. ill see if ive got the picture of my old 1.1 with the front bumper off |
|
| Author: | EvilDes [ Wed Sep 19, 2007 10:44 am ] |
| Post subject: | |
Oh, and you'll need to make the holes at the ends of the bumper so it is bolted to the arches. |
|
| Author: | EvilDes [ Wed Sep 19, 2007 10:45 am ] |
| Post subject: | |
| Author: | andywrc [ Wed Sep 19, 2007 4:32 pm ] |
| Post subject: | |
well i was thinking that the 3 holes were maybe to suport the spot lamps? na it is plastic, not fibreglass and as for the foam, i only thort that as it dont have the 2 bolts that the normal fiestas norlmally have to support it so it has to be help in some part and as for the holes on the wing section, tahts no biggy really anyone seen there front pannels and looked? |
|
| Author: | xmadxmoex [ Wed Sep 19, 2007 4:38 pm ] |
| Post subject: | |
i havent yer.. the fogs are held in via holes in the bumper IIRC them things look like they should have a bolt put in them and then use them to bolt the bumper to the car.. i would say ask ford.. but there totaly useless when it comes to stuff like that haha 
|
|
| Author: | andywrc [ Wed Sep 19, 2007 4:40 pm ] |
| Post subject: | |
lol and i work for fords in the body shop 
its my week off so wanna get it all fitted up so i no how it gos on so i can paint it nxt week at work lol its a pretty damn nice bumper tho, looks like the si one but different in so many ways
|
|
| Author: | andywrc [ Mon Sep 24, 2007 6:19 pm ] |
| Post subject: | |
| Author: | AW3K [ Tue Sep 25, 2007 4:51 pm ] |
| Post subject: | |
was gunna say the rs ones mount onto an old black bumper, same as the back 
Andy |
|
| Author: | andywrc [ Tue Sep 25, 2007 6:10 pm ] |
| Post subject: | |
| Author: | AW3K [ Tue Sep 25, 2007 6:16 pm ] |
| Post subject: | |
| Author: | andywrc [ Tue Sep 25, 2007 6:17 pm ] |
| Post subject: | |
| Author: | AW3K [ Tue Sep 25, 2007 6:22 pm ] |
| Post subject: | |
| Author: | andywrc [ Tue Sep 25, 2007 6:23 pm ] |
| Post subject: | |
| Author: | andywrc [ Tue Sep 25, 2007 6:24 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|