| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| modding mondeo tb to fit https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=7328 |
Page 1 of 1 |
| Author: | garry_noble [ Sat Jun 09, 2007 8:27 pm ] |
| Post subject: | modding mondeo tb to fit |
jst wondering what is actually involved when u need to mod it as i did have look and sensor is in the way and the swinging arm bit goes wrong way anybody got pics of theres ? thanks garry |
|
| Author: | Mouse [ Sat Jun 09, 2007 10:32 pm ] |
| Post subject: | |
| Author: | garry_noble [ Sat Jun 09, 2007 10:35 pm ] |
| Post subject: | |
| Author: | lucasdemoley [ Sun Jun 10, 2007 1:16 pm ] |
| Post subject: | |
| Author: | james_rs [ Sun Jun 10, 2007 6:59 pm ] |
| Post subject: | |
Il get a pic of mine, had to file some bit/angle grind it. |
|
| Author: | xmadxmoex [ Mon Jun 11, 2007 8:17 am ] |
| Post subject: | |
| Author: | saqmaster [ Mon Jun 11, 2007 3:20 pm ] |
| Post subject: | |
| Author: | james_rs [ Tue Jun 12, 2007 6:44 pm ] |
| Post subject: | |
You need to swap the linkage over, swap the TPS sensor round, then the throttle cable braket,; The bottom hole lines up and bolts in, however the one on the side, you need to angle grind part away so theres not actually a hole but a bit for the bolt to sit in and hold braket. Hard to explain, but look at the pics 
|
|
| Author: | john_d [ Mon Jun 18, 2007 8:21 pm ] |
| Post subject: | |
| Author: | saqmaster [ Mon Jun 18, 2007 8:32 pm ] |
| Post subject: | |
| Author: | john_d [ Mon Jun 18, 2007 8:34 pm ] |
| Post subject: | |
| Author: | garry_noble [ Mon Jun 18, 2007 8:40 pm ] |
| Post subject: | |
well when i ran the 1.6 throttle body revs were restriced and acceleration was little slow !! now i have fitted the 2litre throttle body you notice alot of difference to the cars speed and acceleration as the 2litre one has a larger bore size and butterfly is allowing the correct amount of air thro as it was meant to ! |
|
| Author: | john_d [ Mon Jun 18, 2007 8:48 pm ] |
| Post subject: | |
so u'd recommend modding the 2l TB them m8? was it hard to do? |
|
| Author: | garry_noble [ Mon Jun 18, 2007 9:00 pm ] |
| Post subject: | |
| Author: | john_d [ Mon Jun 18, 2007 10:04 pm ] |
| Post subject: | |
aint got a 1.6 TB, i may however aquire the parts the next time im at the scrapies 
|
|
| Author: | james_rs [ Tue Jun 19, 2007 12:30 pm ] |
| Post subject: | |
| Author: | garry_noble [ Tue Jun 19, 2007 6:18 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|