cheers guys, great help.
i have just bought this tell me what you think
http://cgi.ebay.co.uk/FORD-MONDEO-MK2-2 ... dZViewItem
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| EFI to Zetec ? https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=6531 |
Page 1 of 1 |
| Author: | jonno102 [ Sun Apr 22, 2007 9:07 am ] |
| Post subject: | EFI to Zetec ? |
I have an si, 1.6 EFI and im wanting to drop a 2.0l in, i have searched on the forum and can only find guides for the 1.6 zetec conversion, is it possible to drop a zetec in my EFI ? Do I have to do any extra work/mods ? Cheers, Great forum BTW! Jonno. |
|
| Author: | onslack [ Sun Apr 22, 2007 9:34 am ] |
| Post subject: | |
welcome to the forum what car have you got? xr2i 1.6 cvh? if your car isn't an Si with a zetec engine and has a cvh instead, i think you'd need:- to modify the engine mounts get the engine loom from a 1.6 Si and all the other bits that were stated in the guide for converting a 1.6 Si to a 2.0 but i could be wrong i will wait for the more experience users to answer[lol] |
|
| Author: | jonno102 [ Sun Apr 22, 2007 10:06 am ] |
| Post subject: | |
hi mate, no I have a standard fiesta 1.6 si 16v. Cheers, Jonno. |
|
| Author: | andyleesy [ Sun Apr 22, 2007 10:24 am ] |
| Post subject: | |
hi mate it's a straight swap, all you need is - engine, (try get a phase 2 silvertop) deep, desk, dewy ECU 2.0 MAF think that will basically get you started cheers andy |
|
| Author: | jonno102 [ Sun Apr 22, 2007 10:31 am ] |
| Post subject: | |
Nice one mate ! Im not very mechanical minded though, whats a deep, desk & dewy ECU? Ive got a mate doing the conversion for me, hes a honda mechanic, and he has just told me to get all the bits together. Anyone got any idea on approx 0-60 with the 2.0l in and using the si gearbox, i know it all depends on ride height and what rims and tires are being used, but just an approx would be great. Cheers for the help guys. Jonno. |
|
| Author: | andyleesy [ Sun Apr 22, 2007 10:43 am ] |
| Post subject: | |
the dewy deep and desk are all codes on the ecu, don't worry though as they are clearly labelled... but always specifiy one or all 3 of the codes when buying one just to make sure... your 0-60 will be around 8 seconds i'd have though, you could make it sub 8 seconds with the following 2.0 zetec or 1.8 rs1800 throttle body & inlet better exhaust manifold, (1.8 rs1800), as the 1.6 will be quite restrictive... thats all that comes to mind at the mo, obviously assuming the engine is in good condition |
|
| Author: | Mattyboy Esq [ Sun Apr 22, 2007 11:28 am ] |
| Post subject: | |
| Author: | jonno102 [ Sun Apr 22, 2007 12:09 pm ] |
| Post subject: | |
cheers guys, great help. i have just bought this tell me what you think
http://cgi.ebay.co.uk/FORD-MONDEO-MK2-2 ... dZViewItem |
|
| Author: | Mattyboy Esq [ Sun Apr 22, 2007 12:14 pm ] |
| Post subject: | |
What ecu does it come with, did you ask? Should be ok, most people replace all the gaskets so you shouldn't have any problems if you do that! Did you pay the £55 postage? |
|
| Author: | jonno102 [ Sun Apr 22, 2007 12:17 pm ] |
| Post subject: | |
didnt ask about ecu but for £50 its a steal, had to pay p&p cant get down there lol |
|
| Author: | Mattyboy Esq [ Sun Apr 22, 2007 12:26 pm ] |
| Post subject: | |
Why not this one less miles but still works out the same with postage?!? lol! http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... mot_widget |
|
| Author: | jonno102 [ Sun Apr 22, 2007 12:33 pm ] |
| Post subject: | |
oh well never mind already bought it lol, thats what you get for being a compulsive buyer ! |
|
| Author: | jonno102 [ Sun Apr 22, 2007 12:56 pm ] |
| Post subject: | |
| Author: | Mattyboy Esq [ Sun Apr 22, 2007 3:05 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|