| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| wing ! https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=5364 |
Page 1 of 1 |
| Author: | garry_noble [ Thu Feb 01, 2007 7:32 pm ] |
| Post subject: | wing ! |
hey guys when i got my car i knew it had front passenger damage due to the gap between the wing and bonnet well nw i have fitted spaces to the car, the drivers side wheel is in line with the arch spats but the passenger side isnt its inside the arch as im tryin to get the si to look lovely i wanna sort out this wing problem how hard is it to move the wing further in............. i beleive they used tht seam seal aswell lol how much would bodyshop charge as last option any help would be great! thanks garry |
|
| Author: | Adam1986_2007 [ Fri Feb 02, 2007 3:35 pm ] |
| Post subject: | |
Get some pictures up and show the extent of the gap, my project car had a new passenger front wing and was out of line slghtly, the bodyshop is fixing it when its up. Hop its not serious damage. |
|
| Author: | garry_noble [ Fri Feb 02, 2007 4:51 pm ] |
| Post subject: | |
hi well reason i ask is that as i put spacers on the wheel on the drivers side isnt within arch its like inline i think lol and thts the perfectly normal wing then the wheel on passenger side is within the arch and the only reason is as i said before that the passenger arch was changed and that they didnt align it hence why i have bigger gap on that side pics will show ya wat i mean 
drivers wheel 
passenger wheel 
now for bonnet drivers side 
passenger side 
|
|
| Author: | xmadxmoex [ Fri Feb 02, 2007 5:16 pm ] |
| Post subject: | |
| Author: | garry_noble [ Fri Feb 02, 2007 7:14 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Fri Feb 02, 2007 9:01 pm ] |
| Post subject: | |
| Author: | garry_noble [ Fri Feb 02, 2007 11:17 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Fri Feb 02, 2007 11:30 pm ] |
| Post subject: | |
| Author: | jdfiesta [ Sat Feb 03, 2007 12:11 am ] |
| Post subject: | |
i'd say lower chassis is bent to be honest dude JJ |
|
| Author: | garry_noble [ Sat Feb 03, 2007 12:33 am ] |
| Post subject: | |
alrite mate i would hate to say it but im hoping its not but the otha day i had full lazer alignement which told me all the castor, camber, toe's ect are all fine also the track width are all fine aswell they are spot on in terms of comparing them to the manufacturers data. this is top spec tool tht used to determine chassis tweak so im doubtful its that but nt completely rulin that out |
|
| Author: | fiestasiphil [ Sat Feb 03, 2007 3:05 pm ] |
| Post subject: | |
| Author: | garry_noble [ Sat Feb 03, 2007 5:39 pm ] |
| Post subject: | |
| Author: | frostie [ Sun Feb 04, 2007 7:40 pm ] |
| Post subject: | |
| Author: | garry_noble [ Sun Feb 04, 2007 7:47 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Mon Feb 05, 2007 2:07 am ] |
| Post subject: | |
i got a pic of mine when i crashed it bonnet was fine but everything moved over a bit http://i23.photobucket.com/albums/b398/ ... 61fec4.jpg your motor may have had a replacement wing at some stage have a look and see if it a genuine ford one if not its prob had a bad repair job[/url] |
|
| Author: | jdfiesta [ Mon Feb 05, 2007 4:50 am ] |
| Post subject: | |
when i'm working on mine next i'll take some measurements for you to compare against. it may have just had a new wing but the amounts that wheels sticks out does not look right at all JJ |
|
| Author: | fiestasiphil [ Mon Feb 05, 2007 10:15 am ] |
| Post subject: | |
| Author: | garry_noble [ Mon Feb 05, 2007 10:45 am ] |
| Post subject: | |
| Author: | jdfiesta [ Mon Feb 05, 2007 12:01 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Tue Feb 06, 2007 12:44 am ] |
| Post subject: | |
look a that pic above then look at this one the same car but repaired you can see where it was bent over etc and now straight 
hope this helps mate let us know what happens when you go down to the bodyshop 2morow 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|
