| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Help with ice? https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=5044 |
Page 1 of 2 |
| Author: | delforty3 [ Wed Jan 17, 2007 12:14 am ] |
| Post subject: | Help with ice? |
| Author: | xmadxmoex [ Wed Jan 17, 2007 12:26 am ] |
| Post subject: | |
| Author: | delforty3 [ Wed Jan 17, 2007 12:39 am ] |
| Post subject: | |
| Author: | xmadxmoex [ Wed Jan 17, 2007 12:49 am ] |
| Post subject: | |
| Author: | ChubbyJon [ Wed Jan 17, 2007 12:14 pm ] |
| Post subject: | |
| Author: | spiky [ Wed Jan 17, 2007 1:18 pm ] |
| Post subject: | |
| Author: | delforty3 [ Wed Jan 17, 2007 1:22 pm ] |
| Post subject: | |
Thanks for the replies, could comeone tell me what this wire is for? the remote lead? what does it do? What do i connect it to on my head unit because i dont think mine has anywhere to connect it? This wire: 
Two spare connection on the back of head unit doing nothing, dont look like it fits in here: 
Picture of the back of head unit: 
THanks |
|
| Author: | spiky [ Wed Jan 17, 2007 1:27 pm ] |
| Post subject: | |
its your amp remote wire, do you have the handbook for the headunit |
|
| Author: | delforty3 [ Wed Jan 17, 2007 1:30 pm ] |
| Post subject: | |
Yeh i have but its in German!  so i can only go by the pictures. What does the remote wire do?
|
|
| Author: | ChubbyJon [ Wed Jan 17, 2007 1:32 pm ] |
| Post subject: | |
It runs from the headunit to the amp and just swithces it on and off so it doesn't drain your battery. |
|
| Author: | spiky [ Wed Jan 17, 2007 1:33 pm ] |
| Post subject: | |
bum, can you take a detailed photo of the wiring for me and also can you include all the wires, sort of separated basically when you turn the headunit on a small current is sent down the wire, to tell the amp to turn on, it does the same to turn it off |
|
| Author: | delforty3 [ Wed Jan 17, 2007 1:41 pm ] |
| Post subject: | |
Right found some english instruction for me head unit, by the sound of it it doesnt come with the remote bit on the back 
Do you connect the remote lead to its on individual connection on the back of the unit? or using one of them wires that control the power to the stereo, illumination, light and all that? (one of the wires that go through the iso connectors) |
|
| Author: | spiky [ Wed Jan 17, 2007 1:49 pm ] |
| Post subject: | |
the wire will be like this. what wire does the book say come out of the back of the headunit, also what make and model is the unit |
|
| Author: | xmadxmoex [ Wed Jan 17, 2007 1:50 pm ] |
| Post subject: | |
your headunit should have a 'remote out' if it doesnt you can run it from a live on the car via your own switch that you turn on off whenever you like.. or you can run it from an ignition live that come on when you turn the key
|
|
| Author: | fiestamodder12 [ Wed Jan 17, 2007 2:14 pm ] |
| Post subject: | |
if your head unit does not have a remote wire use the POWER ANTENNA wire , does exactly the same job , all its ther for is to send a signal to the amplifier when you switch on the headunit to tell the amp to turn on , and thats all the power antenna wire does so they are interchangable provided you dont have a power antenna 
HTH Gav |
|
| Author: | si 1.4 [ Wed Jan 17, 2007 5:05 pm ] |
| Post subject: | |
| Author: | paul88 [ Wed Jan 17, 2007 7:43 pm ] |
| Post subject: | |
 i taped my remote wire in to the power antenna cable from head unit cables should have name printed on the cable i cut the wire in half stripped both ends and used a scotch block and wrapped that in electrical tape works fine now
|
|
| Author: | delforty3 [ Wed Jan 17, 2007 9:53 pm ] |
| Post subject: | |
| Author: | spiky [ Wed Jan 17, 2007 9:57 pm ] |
| Post subject: | |
thats the one mate, what unit is it, ill look up a wiring diagram and check for you if you would like me to. DO NOT CONNECT IT TO THE GREEN CABLE |
|
| Author: | delforty3 [ Wed Jan 17, 2007 10:32 pm ] |
| Post subject: | |
Ok, wont connect it to that
It a JVC, it either the KD-G322, KD-G321 or the KD-G3. Not sure which one it is exactly, but the instructions is for them 3 models, so there can't be that much difference with the wiring. Another probem i am having, i just got a sony xplod sub and amp cheap of someone, and i just wanted to test if the amp was working ok, so i connected the live and ground so should some of these lights come on, or wouldnt i know till i connect the speakers? 
|
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|