I had them on mine, fitted straight on:
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Big brake conversion. https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=25185 |
Page 1 of 1 |
| Author: | minx_94 [ Fri Jul 26, 2013 3:42 pm ] |
| Post subject: | Big brake conversion. |
Hi, I'm planning on uprating my front brakes for a recently done 2.0 Si, I have 15" zetec-s phase 2 alloys, what brakes can I get that will bolt on without to much modification other than drilling to bolt on. I was planning on using Fiesta ST/ST150 brakes, will they fit under 15's? Thanks. |
|
| Author: | The Loumiester [ Fri Jul 26, 2013 10:45 pm ] |
| Post subject: | Re: Big brake conversion. |
Yes they will, its commonly done under 15" wheels. Big g1985 does (think he still does it) a 300mm brake set ground to fit under zetec s and gti alloys. viewtopic.php?f=10&t=20723 |
|
| Author: | DanFraser [ Sat Jul 27, 2013 2:51 pm ] |
| Post subject: | Re: Big brake conversion. |
A mondeo servo is going to be the biggest factor in braking power. Find a mk1 mondeo in a scrappy, 4 feeds off the master cylinder and no abs. Just that change alone will throw you through the windscreen. |
|
| Author: | minx_94 [ Sat Jul 27, 2013 4:08 pm ] |
| Post subject: | Re: Big brake conversion. |
Okay thanks guys, I will do the ST150 conversion knowing they will fit under my wheels. No spacing either? And will swap servo at a later date. Is it a straight swap? Thanks |
|
| Author: | minx_94 [ Sat Jul 27, 2013 4:17 pm ] |
| Post subject: | Re: Big brake conversion. |
Plus I think ST150 brakes are 278mm if I remember rightly instead of 300mm lol. Just worried about spacing. |
|
| Author: | The Loumiester [ Sat Jul 27, 2013 5:26 pm ] |
| Post subject: | Re: Big brake conversion. |
Is a straight swap. |
|
| Author: | minx_94 [ Sat Jul 27, 2013 11:22 pm ] |
| Post subject: | Re: Big brake conversion. |
Awesome! Hopefully no spacing because It will rub if so! |
|
| Author: | big g1985 [ Sun Jul 28, 2013 9:32 am ] |
| Post subject: | Re: Big brake conversion. |
My setups are ground to fit on my jig |
|
| Author: | minx_94 [ Sun Jul 28, 2013 5:36 pm ] |
| Post subject: | Re: Big brake conversion. |
I did see that on your thread. But will ST150 fit without grinding? |
|
| Author: | big g1985 [ Sun Jul 28, 2013 6:32 pm ] |
| Post subject: | Re: Big brake conversion. |
Dependant on the wheels your running |
|
| Author: | minx_94 [ Mon Jul 29, 2013 1:46 pm ] |
| Post subject: | Re: Big brake conversion. |
Ph2 Zetec-S Alloys 15" |
|
| Author: | big g1985 [ Mon Jul 29, 2013 4:23 pm ] |
| Post subject: | Re: Big brake conversion. |
Fit fine |
|
| Author: | Percy [ Mon Jul 29, 2013 7:24 pm ] |
| Post subject: | Re: Big brake conversion. |
I had them on mine, fitted straight on:
|
|
| Author: | minx_94 [ Tue Jul 30, 2013 1:12 am ] |
| Post subject: | Re: Big brake conversion. |
Thanks guys! |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|