get on photobucket mate. upload your photos on there (its free) then you get the image code and copy and past it then post
welcome btw mate!
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| can any1 help with turbo conversion https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=24516 |
Page 1 of 1 |
| Author: | marve5 [ Sun Oct 21, 2012 9:25 pm ] |
| Post subject: | can any1 help with turbo conversion |
i wana turbo my fsi 1.6 but dont no were to start ? what do i need |
|
| Author: | Mattyboy Esq [ Sun Oct 21, 2012 10:00 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
Put a 2.0L in then turbo it. |
|
| Author: | bensouthport [ Sun Oct 21, 2012 10:02 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
check out jonosi's build thread (in the members gallery). he had his 1.6si turbo charged by a motorsport company. pretty sure theres a spec sheet of what they did so have a look on there bud! |
|
| Author: | marve5 [ Sun Oct 21, 2012 10:08 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
cheers i was thinkin bout the 2litre but im guuna stick with the 1.6 anf how can i put pics up ?lol |
|
| Author: | bensouthport [ Sun Oct 21, 2012 10:11 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
get on photobucket mate. upload your photos on there (its free) then you get the image code and copy and past it then post welcome btw mate!
|
|
| Author: | Mattyboy Esq [ Sun Oct 21, 2012 10:14 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
But no offense to Jono( or Adam) as his an imaculate example. But the cost involved in turbo'ing the 1.6 to get somewhat around 2.0l power in a low boost set up, is somewhat pointless imo. You may as well fit a 2.0l then turbo that. |
|
| Author: | Mattyboy Esq [ Sun Oct 21, 2012 10:16 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
Just seen your in braintree. Speak to phil ask him to take you out in his 2.0l (n/a not a turbo) you'll see how much better foundations it is. |
|
| Author: | marve5 [ Sun Oct 21, 2012 10:26 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
cheers for the advice i no someone who knows phil ill have 2 get him 2 take me out |
|
| Author: | marve5 [ Sun Oct 21, 2012 10:32 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
and wat r ur views on the cossie splitters ? |
|
| Author: | Percy [ Sun Oct 21, 2012 10:51 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
As mentioned adding a turbo to the 1.6 isn't really worth it. A 2.0 conversion is cheap/easy conversion and gives good power. If wanting a turbo a 1.8 can be a little cheaper than a 2.0 but of course is more limited. |
|
| Author: | marve5 [ Sun Oct 21, 2012 10:55 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
your really making me think i should just go 2.o litre now im confused lol |
|
| Author: | Chris [ Sun Oct 21, 2012 11:40 pm ] |
| Post subject: | Re: can any1 help with turbo conversion |
Yes go 2.0, and then turbo it later as its much cheaper and you will get a ton more power. Cossie splitters look awesome. |
|
| Author: | meilack [ Mon Oct 22, 2012 8:18 am ] |
| Post subject: | Re: can any1 help with turbo conversion |
yeah i'm buying a 1.6 zetec turbo but on a cost basis i wouldn't do it from scratch  2.0 will need pistons etc - 1.8 can be turbo'd on a decomp plate and around 10psi |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|