£45 post for brakes is worth it.
But Id rather get new discs as they look shagged.
Could easily run bigger ones for not much more cost
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| brakes https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=23775 |
Page 1 of 1 |
| Author: | bensouthport [ Tue Feb 28, 2012 1:56 pm ] |
| Post subject: | brakes |
http://www.fiestaturbo.com/forums/260mm ... -vt193312/ what do we reckon chaps? these are obviously bolt on, but are the gains huge? and how will a cossie set up compare? and are they bolt on? |
|
| Author: | happypaul [ Tue Feb 28, 2012 2:40 pm ] |
| Post subject: | Re: brakes |
£45 post for brakes is worth it. But Id rather get new discs as they look shagged. Could easily run bigger ones for not much more cost
|
|
| Author: | bensouthport [ Tue Feb 28, 2012 2:47 pm ] |
| Post subject: | Re: brakes |
yeah and pads i reckon paul... do you know if the cossies are bolt on? because i know wango has some |
|
| Author: | happypaul [ Tue Feb 28, 2012 3:15 pm ] |
| Post subject: | Re: brakes |
Think you have to drill out the hub holes or 12mm, and use a 3mm spacer on the disc for cossies. Same as which you do for most of the upgrades 
|
|
| Author: | bensouthport [ Tue Feb 28, 2012 3:35 pm ] |
| Post subject: | Re: brakes |
is that including the rs2000's then too?  ta paul
|
|
| Author: | meilack [ Tue Feb 28, 2012 3:36 pm ] |
| Post subject: | Re: brakes |
they bolted straight onto an xr2i before but i maybe wrong |
|
| Author: | big g1985 [ Tue Feb 28, 2012 6:18 pm ] |
| Post subject: | Re: brakes |
cossies calipers will bolt straight on its the mondeo calipers you need to drill the hubs out for |
|
| Author: | bensouthport [ Tue Feb 28, 2012 6:19 pm ] |
| Post subject: | Re: brakes |
what about rs2000? i know your the brake man so thats sound lol |
|
| Author: | bensouthport [ Tue Feb 28, 2012 6:20 pm ] |
| Post subject: | Re: brakes |
just not sure the cossie set up will fit behind my wheels, i know the rs2000's will because i have the wheels off that car
|
|
| Author: | TANGO [ Tue Feb 28, 2012 7:04 pm ] |
| Post subject: | Re: brakes |
I'm sure they will mate.. ;-) |
|
| Author: | Jam [ Tue Feb 28, 2012 7:45 pm ] |
| Post subject: | Re: brakes |
no they wont. youll need spacers with those wheels. its to do with the shape of the spokes..doesnt need much. 3mm should do it
|
|
| Author: | Tonwah [ Tue Feb 28, 2012 11:30 pm ] |
| Post subject: | Re: brakes |
Cossie/mondeo v6 with 278mmx24mm discs will fit under rs2000 wheels with only the 3mm spacer between the hub and the disc, this is a fact as it is what I am running on my car, if I get a chance I'll take a pic and upload it |
|
| Author: | Tonwah [ Tue Feb 28, 2012 11:32 pm ] |
| Post subject: | Re: brakes |
With mondy/cossie brakes you do have to drill the brake pad carrier holes out from 10mm up to 12mm, the standard flexi pipes fit no problem |
|
| Author: | DarrenFsi [ Wed Feb 29, 2012 12:28 am ] |
| Post subject: | Re: brakes |
i may have some v6 mondeo calipers you can have free mate then you can spend the money on having them properly machined to fit rather than spacers etc |
|
| Author: | bensouthport [ Sat Mar 03, 2012 10:55 am ] |
| Post subject: | Re: brakes |
thanks tonwah, darren... think i might just go for the rs2000 brakes for ease, but are they a direct bolt on? i dont mind having to space out the cossie brakes if needed and drill them out, but it would save hassle! |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|