Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
Aftermarket HT leads and injectors? https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=23262 |
Page 1 of 2 |
Author: | iemke [ Sun Oct 30, 2011 4:53 pm ] |
Post subject: | Aftermarket HT leads and injectors? |
Hey guys where could I find these for a RS1800 Fiesta? |
Author: | Ry [ Sun Oct 30, 2011 5:45 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Magnecor, NGK, MSD, all do decent leads. With regards to aftermarket injectors, what size do you need? If you're needing to inject more fuel into the system, you'll possibly need to think about an uprated fuel pump too. |
Author: | iemke [ Sun Oct 30, 2011 7:09 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
already getting a walbro and the rest just not sure for injectors looking around 170-160 out the 1800 would beige ones do? |
Author: | will121 [ Sun Oct 30, 2011 7:45 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Beige ones should be ok for around that, but if getting close can fit am adjustable fuel pressure reg and up the fuel line pressure, if changing injector etc are you running a different ecu? |
Author: | stainlessmole [ Sun Oct 30, 2011 7:46 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
If i'm not mistaken the beige injectors are the best for n/a with standard pump |
Author: | iemke [ Sun Oct 30, 2011 7:49 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Yeah im going to get her mapped with a uni chip and going to fit a FPR if need be weres the best place to get beige injectors and are they direct replacements and whats the size 300cc or somthing? |
Author: | will121 [ Sun Oct 30, 2011 8:47 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
There is a 2 litre mondeo fuel rail on ebay £27 think flow about 200cc |
Author: | Ry [ Mon Oct 31, 2011 8:14 am ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
That's cheap. Wish my stuff was that bargainous!! |
Author: | iemke [ Mon Oct 31, 2011 6:38 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Author: | - Danny Boy - [ Mon Oct 31, 2011 7:18 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Beige are good for upto 300bhp ![]() ![]() |
Author: | iemke [ Mon Oct 31, 2011 10:39 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
do they just fit straight on or do i need the Mondeo fuel rail to fit? |
Author: | iemke [ Sun Nov 06, 2011 11:34 am ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Any1 |
Author: | will121 [ Sun Nov 06, 2011 1:12 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
What inlet arrangements are you going to use, standard RS1800 or individual throttle bodies? If running standard RS stuff complete with injector sandwich plate it uses side fed injectors, early 2 litre mondeos use beige injectors and should be ok for 160 - 170bhp. Later black top zetec used end fed injectors. Some more info on what you are looking to do may help others advise |
Author: | iemke [ Sun Nov 06, 2011 6:56 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Well i was looking to use the normal rs1800 inlet but im not too sure the fords are new to me so im doing research as i go along really |
Author: | happypaul [ Sun Nov 06, 2011 7:23 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
160 bhp tops with that inlet. Use beige Mondeo side feds. |
Author: | Petrol [ Sun Nov 27, 2011 4:05 am ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
yea the standard zetec inlets get very restrictive and the 2.0 wont get more than 160 N/A via it (150 odd for the 1.8) best try find some bodies or check out on fiestafrenzy for a N/A inlet that would flow better |
Author: | fiestasiphil [ Wed Dec 14, 2011 1:32 am ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
ive got a set of megnecore leads in red 20quid |
Author: | iemke [ Wed Dec 14, 2011 11:57 am ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Author: | fiestasiphil [ Wed Dec 14, 2011 6:59 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
Author: | Petrol [ Wed Dec 14, 2011 9:26 pm ] |
Post subject: | Re: Aftermarket HT leads and injectors? |
hmm im slightly interested in them phil ![]() |
Page 1 of 2 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |