| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Problem Lowering Fiesta Si https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=18164 |
Page 1 of 1 |
| Author: | TaiD [ Wed Nov 25, 2009 6:56 pm ] |
| Post subject: | Problem Lowering Fiesta Si |
Hello All, I am new here having just bought my first Fiesta. I have bought a 1995 1.6 Si and am trying to lower it. I bought some springs off ebay and having taken a front strut off my car, they don't look the same. Now I appreciate the lowering springs will be a bit different, the coil of original springs tapers in (gets narrower) towards the base of the shock and seems to be pressed into the shock with some lugs. I can't get the spring loose even using spring compressors. The new springs I have and the same diameter all the way down. Could it be that I have got the wrong springs for my car? Will I need to replace the shocks aswell as the original springs seem attached or can I just "persuade" them out? Many Thanks T |
|
| Author: | onslack [ Wed Nov 25, 2009 10:36 pm ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
welcome to fsi any chance you can get some pic's of what you mean? as i cant quite visualise it   now i'm not the best regarding knowledge, so not sure if there a difference but did you get mk3 or 3.5 springs? i know there's a difference in the shocks themselves but not sure if its goes as far as the springs as well hopefully someone else with more knowledge can help you out here |
|
| Author: | Elward [ Wed Nov 25, 2009 10:54 pm ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
as you probably know theres two different mk3's theres the actual mk3 which is pre 1995 and then the mk3.5 which is 1995 onwards, they have two different size hubs but the springs are still the same i have the poverty spec one not the si, im not sure if the si has different or "sportier" shocks but mine were simple to do, just compress the spring and undo the top and bobs your uncle its apart, can you get a pic of these lugs? |
|
| Author: | TaiD [ Thu Nov 26, 2009 12:09 am ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
I will try to find a pic of what I mean, I've put it all back together now but ill see if i can find a pic online somewhere. Failing that I'm sure it will be in bits again before too long 
|
|
| Author: | TaiD [ Thu Nov 26, 2009 12:22 am ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
Right, looking at the STX website it looks like there are 2 different types of srping available. 1 suits all bar ABS/van/diesel. The other is specifically for 1.6Si/Turbo/RS1800 This pic is what i mean, the last coil is narrower on my shocks and is seated inside some metal lugs. The normal fiesta springs are the same diameter on all the coils and wont fit into my shocks.  I think, to sum up, I have been a muppet and bought the wrong springs.  However, if anyone wants some normal fiesta mk3 -40mm springs for £40 (They are used, i bought them s/h and the rears come with standard shocks attached) send me a message! 
|
|
| Author: | DANIELP1991 [ Sun Nov 29, 2009 12:03 pm ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
you got the wrong springs i think mate. pretty sure all mk3/mk3.5 springs are the same. |
|
| Author: | TaiD [ Sun Nov 29, 2009 11:41 pm ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
Yeah think I have....ah well. It can wait till the new year I'm thinking I might do the dampers at the same time, geta proper kit rather than just the springs. |
|
| Author: | fiestasiphil [ Mon Nov 30, 2009 4:46 pm ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
all mk3/mk3.5 springs will fit all fiestas its just the shocks that are different. can you send me the code number on the shocks it will be f0 something 
|
|
| Author: | TANGO [ Mon Nov 30, 2009 5:14 pm ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
im sure mine are exactly the same, there is only 2 types, mk 3 and mk3.5 |
|
| Author: | fiestasiphil [ Mon Nov 30, 2009 6:58 pm ] |
| Post subject: | Re: Problem Lowering Fiesta Si |
in the gmax pic above they look right the 2 to the left are the rear springs and the other 2 the fronts the fronts sit upside down as in the pic or they wont fit...the top is the bottom of the spring if that makes sence going by the picture |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|