| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| lowering???? https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=18161 |
Page 1 of 1 |
| Author: | codeye [ Wed Nov 25, 2009 2:33 pm ] |
| Post subject: | lowering???? |
hi all... iv seen some crazy low festa's on here lol and was wondering what the best choices are as i want mine lower but its rubbing already. so far its lowerd 35mm all round on g-max kit with 15's and 195/45/15 my rear acrhes rub now and again and i get rubbing on the front at full lock lol |
|
| Author: | onslack [ Wed Nov 25, 2009 11:03 pm ] |
| Post subject: | Re: lowering???? |
mine was lowered 60mm all round and i only had a very slight rub on full lock mine were bilstein kit( shocks and springs) on 195/45/15 GTi alloys |
|
| Author: | Elward [ Wed Nov 25, 2009 11:06 pm ] |
| Post subject: | Re: lowering???? |
depends what wheels if there ford fitment you can usually get away with a 60mm drop on 195/45/15 as there the right offset but with multifit there usually the wrong offset like mine were and scrub like a bitch |
|
| Author: | - Danny Boy - [ Sat Nov 28, 2009 6:02 pm ] |
| Post subject: | Re: lowering???? |
Mine is lowered 40mm all round on spax shocks and springs with escort gti alloys running 195/50/15 tyres, and i used to have 195/45/15 tyres on my old alloys and i get the smallest amount of rub on the inner arches on full lock, as said, depends on the offset of the wheels, if its not far from not rubbing, put small spacers in there 
|
|
| Author: | fiestasiphil [ Thu Dec 03, 2009 2:05 am ] |
| Post subject: | Re: lowering???? |
my 2 litre is 60mm but being 60mm it knocks out the wishbones as the camber would be out and you will go through tyres. my runabout is 40mm on 14''si alloys and handles fine and only has minor light rubbing and tyres wear normally |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|