| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Rolling arches https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=1588 |
Page 1 of 1 |
| Author: | dan si [ Thu Oct 06, 2005 8:30 pm ] |
| Post subject: | Rolling arches |
can any one give me a guide on how to roll my arches cheers |
|
| Author: | javablu [ Fri Oct 07, 2005 12:51 am ] |
| Post subject: | |
1. Get car keys 2. Unlock your door 3. Sit down in your drivers seat 4. Adjust mirrors and driving position. 5. Open map and jot down route to St. Albans 6. Drive in the direction of Rtec - St. Albans. 7. Arrive at your destination (Rtec) 8. Ask for your arches to be rolled. 9. Reverse Actions 1-7. Either get someone who knows what they are doing, do it. Or smash the shit out of them with a hammer 
good luck. |
|
| Author: | Paul [ Fri Oct 07, 2005 5:43 pm ] |
| Post subject: | |
i considered using a gas torch / lighter etc to melt them into the position i wanted but its not really very clever |
|
| Author: | dan si [ Sat Oct 08, 2005 10:51 pm ] |
| Post subject: | |
any other ideas. i got 16" alloys with 195/45 tyres and want it lowered 40mm. what type of worked is involved? any help is appreciated cheers |
|
| Author: | Paul [ Sun Oct 09, 2005 1:28 pm ] |
| Post subject: | |
im down an dirty using: 195/50/15's 0-35mm drop on those gmax springs.. the red ones anyway. with std o.e shockers i get rubbing on full lock and when goin over bumps. theres guides on fiestaturbo.com on arch work.. try pm'ing chop_suey from here or on ft.com and he shud be able to help.. |
|
| Author: | luke89 [ Tue Oct 18, 2005 1:28 am ] |
| Post subject: | |
| Author: | javablu [ Tue Oct 18, 2005 9:54 am ] |
| Post subject: | |
If you don't have a welder, JB auto weld does the job very well, its been through hell and there is no sign of wear whatesoever on mine 
Rears have to be done properly people! They are double skinned and after water has got in, i'm sure they gradually come away from eachother (sealant is needed and needs to be able to hold up from as much shit as possible)
|
|
| Author: | dan si [ Tue Oct 18, 2005 5:41 pm ] |
| Post subject: | |
| Author: | javablu [ Tue Oct 18, 2005 5:43 pm ] |
| Post subject: | |
| Author: | dan si [ Tue Oct 18, 2005 5:48 pm ] |
| Post subject: | |
| Author: | Paul [ Tue Oct 18, 2005 5:57 pm ] |
| Post subject: | |
| Author: | EvilDes [ Thu Oct 20, 2005 9:40 am ] |
| Post subject: | |
| Author: | dan si [ Thu Oct 20, 2005 5:35 pm ] |
| Post subject: | |
| Author: | Rally_jay [ Sat Oct 29, 2005 9:07 pm ] |
| Post subject: | |
| Author: | Paul [ Sat Oct 29, 2005 9:15 pm ] |
| Post subject: | |
| Author: | Rally_jay [ Sat Oct 29, 2005 9:24 pm ] |
| Post subject: | |
| Author: | javablu [ Sun Oct 30, 2005 11:59 am ] |
| Post subject: | |
I have a feeling they might mate 
You need 195/40/16's i think
|
|
| Author: | markyboysi [ Mon Mar 06, 2006 10:32 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|