get the pro's to do it,
i've seen hundreds of bad attempts at people tinting there own windows,
i work for one of these shops that sells tint film (amongst other things) and oh my! some of the messes i've seen customers do lol
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| best way to apply tinits https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=14401 |
Page 1 of 1 |
| Author: | karlthomas101 [ Wed Feb 11, 2009 11:22 pm ] |
| Post subject: | best way to apply tinits |
i used the water way as if u only have water you can not get air bubles i tested this on my pc it work a charm i not have a pc with a tinted window lol any others that work? |
|
| Author: | megaflea [ Tue Mar 03, 2009 2:01 am ] |
| Post subject: | Re: best way to apply tinits |
get the pro's to do it, i've seen hundreds of bad attempts at people tinting there own windows, i work for one of these shops that sells tint film (amongst other things) and oh my! some of the messes i've seen customers do lol |
|
| Author: | Jamie88 [ Tue Mar 03, 2009 2:07 pm ] |
| Post subject: | Re: best way to apply tinits |
its easy to do aslong as you use the right stuff and dont rush it  i did mine myself and there pretty good, would have been better if i had removed the windows but i think there pretty damn good i used to work for a vinyl company so i know how to apply the stuff but basicly the best thing to used is water with a drop of liquid baby soap as that doesnt have all the bad bits that washing up liquid does then put it into a spay bottle and spray the window and the film! remembering to clean the windows first so there spotless any grease will make it lift again!once both window and film are wet lay the film over the glass and the useing a squeegy or just a credit card apply pressure from the middle outwards(but not too hard on first swipes as your crease the film, once thats done your be left with the film lifing in lines(its hard to explain) but basicly use a heat gun and heat the lifted bits from the middle outwards while pushing them out with you thumb/card untill there gone(this can take a lil while as what the heat is doing is evapourating that warter that is making it lift  it takes alot of heat to melt this stuff so dont worry too much about over heating hope this helps
|
|
| Author: | meilack [ Tue Mar 03, 2009 2:19 pm ] |
| Post subject: | Re: best way to apply tinits |
blimey you worked in vinyl to? small world  and i would have had no idea you tinted your windows yourself
|
|
| Author: | megaflea [ Tue Mar 03, 2009 6:12 pm ] |
| Post subject: | Re: best way to apply tinits |
i just realised the forum title is "best way to apply window Tinits" are these the same as window tints? lol 
|
|
| Author: | Jamie88 [ Tue Mar 03, 2009 8:54 pm ] |
| Post subject: | Re: best way to apply tinits |
| Author: | fiestasiphil [ Wed Mar 04, 2009 1:07 am ] |
| Post subject: | Re: best way to apply tinits |
| Author: | TANGO [ Wed Mar 04, 2009 1:21 am ] |
| Post subject: | Re: best way to apply tinits |
whats the best way to do rs pop outs with the handle? 
|
|
| Author: | boirace1302 [ Fri Mar 06, 2009 1:58 am ] |
| Post subject: | Re: best way to apply tinits |
Get the pro's to do it!
|
|
| Author: | TANGO [ Fri Mar 06, 2009 8:35 am ] |
| Post subject: | Re: best way to apply tinits |
lol, i would never attempt it mate, i dont like the "back of a van" look lol |
|
| Author: | karlthomas101 [ Fri Mar 06, 2009 9:57 pm ] |
| Post subject: | Re: best way to apply tinits |
i did them all ill get some pic if u want but they wen perfict just like a pro!! no probs at all just took me some practice atempts lol but it so easy now hehe |
|
| Author: | happypaul [ Sun Mar 08, 2009 7:18 pm ] |
| Post subject: | Re: best way to apply tinits |
| Author: | karlthomas101 [ Sun Mar 08, 2009 8:38 pm ] |
| Post subject: | Re: best way to apply tinits |
i think the rear was the eseyest lol |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|