welcome to fsi
do you mean the fog lights? if so the only way they'll fit properly would be to have an xr2i/frst front bumper fitted, unless you fancied a bit of fillering etc and make them fit your si bumper
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Fitting Xr2i spotlights to si https://www.fiesta-si.com/forums/viewtopic.php?f=13&t=14080 |
Page 1 of 1 |
| Author: | meggs88 [ Sun Jan 18, 2009 10:59 pm ] |
| Post subject: | Fitting Xr2i spotlights to si |
Hi, I was thinking about fitting a set of spotlights/ driving lights off a xr2i to my fiesta si, just wondered if anyone had done this before to get an idea of what it would look like? Cheers |
|
| Author: | onslack [ Sun Jan 18, 2009 11:04 pm ] |
| Post subject: | Re: Fitting Xr2i spotlights to si |
welcome to fsi do you mean the fog lights? if so the only way they'll fit properly would be to have an xr2i/frst front bumper fitted, unless you fancied a bit of fillering etc and make them fit your si bumper
|
|
| Author: | meilack [ Mon Jan 19, 2009 9:30 am ] |
| Post subject: | Re: Fitting Xr2i spotlights to si |
which, honestly, wouldn't look to great 
|
|
| Author: | meggs88 [ Mon Jan 19, 2009 5:35 pm ] |
| Post subject: | Re: Fitting Xr2i spotlights to si |
Sorry, I meant the lights of an xr2 not the xr2i. Basically I want to fit the old style ford spotlights that fit above the bumper onto my SI. Like the ones in this picture. thanks |
|
| Author: | meilack [ Mon Jan 19, 2009 5:36 pm ] |
| Post subject: | Re: Fitting Xr2i spotlights to si |
ah i see what you mean now
|
|
| Author: | onslack [ Mon Jan 19, 2009 8:23 pm ] |
| Post subject: | Re: Fitting Xr2i spotlights to si |
aaah i also see what you mean now not really sure how you fix it to the Si bumper tho  , maybe use some form of bracket to hold/support the light and fix it to the inside of the bumper
|
|
| Author: | Jam [ Wed Jan 21, 2009 3:35 am ] |
| Post subject: | Re: Fitting Xr2i spotlights to si |
depends where you want to fit them. between the bumper and the bonnet could look a bit pony. in the bumper in place of the fogs can look quite moody. ive got a pic somewhere of a mock up i did. and i know emlyn (sorry if its spelt wrong dude ) had them mounted in his bumper.ill have a dig around here if not ill go take one. with the right combo of bits it does look pretty moody i have to say. Jam. |
|
| Author: | happypaul [ Wed Jan 21, 2009 12:08 pm ] |
| Post subject: | Re: Fitting Xr2i spotlights to si |
As above from Jam  Mounted in the fog light holes on the Si bumper looks good if done right  Wire them to the white wire going to the headlights, they then work when flashing and putting main beam on
|
|
| Author: | Jam [ Sat Jan 24, 2009 8:27 pm ] |
| Post subject: | Re: Fitting Xr2i spotlights to si |
found a shot from a little while ago. hope this gives you an idea  Jam |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|