Wow that's a collection of bits
Any pics of the azev wheels when you get the chance
and what condition are the turbo spoilers in
is there many studs missing 
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Clearout cvh and zetec uprated parts https://www.fiesta-si.com/forums/viewtopic.php?f=10&t=22728 |
Page 1 of 1 |
| Author: | rs220bhp [ Mon Jul 11, 2011 10:24 pm ] |
| Post subject: | Clearout cvh and zetec uprated parts |
It's time for a clearout again, have gathered many parts over the years of fiesta ownership. I could also do with the space to be honest Cvh and turbo parts Thermostat housing in good condition with sensor £7 Pace double capacity intercooler £60 Pro alloy front mount with hoses and fan, ready to bolt on £150 Pace alloy rad good condition, no leaks £100 Pro alloy extra width alloy rad in good condition, no leaks £125 Inlet missing tb and ispv comes with loom £25 Complete inlet with loom £40 Chrome rocker cover x2 £40 each Chrome crossover x2 £40 each Brand new auto specialist chrome cam cover £50 New chrome oil filler cap/grub screw type £15 Ofab ecu, loom with sensors and 3bar map sensor £200 Collins chip mapped for zvh with t34 and greens £130 Green stripes, both sides and rear bumper, nice and straight £110 Bailey header tanks with caps x2 £75 each Bailey oil breather from zvh with 5 outlets £60 Uprated fuel pump, brand new £50 New fuel tank powdercoated white £60 Pop our windows x2 sets with rubbers £40 set Grey bonnet vents in good condition £30 Black bonnet vents in good condition £30 Ash black bonnet no rust £70 White and grey turbo spoilers £25 each 2x 150mph clocks standard £20 each 1 set of white dialed 150mph clock, no yellow fading £35 Zetec parts Various bits of chrome/stainless, header tank cap, power steering cap, filler cap x2 timing belt cover, spark plug cover and spacers, throttle cabel bracket, brake res and cap covers Obx 4-1 manifold and downpipe £150 Stainless 4-2-1 manifold/decat £150 Turbosport lightened and balanced alloy flywheel perfect condition covered very little miles £110 Magnex cat back stainless system £100 Rads in good condition £15 each Various water hoses Brand new newman ph3 cams £275 Ho inlet manifold/sandwich plate complet with loom £70 2l cams x2 sets with pulleys £25 pair Complete powersteering set up inc hoses, rack columb and pump/mounts £40. General bits Rear section roll cage with removeable diagonal £175 2x cvh front strut braces £35 each 2 rear strut braces £30 each cvh efi flywheel in good condition £30 Ap racing 4 paddle clutch, very little use, friction and cover plate and release bearing £140 Black diamond uprated 220mm clutch, little use £60 2 sets of vibra technics gearbox mounts £50 a set Rally design short shifter fitted to rebuilt linkage £60 B+M short shifter, nearly new £175 Spax adjustables for mk3.5 only done 1k max, 45mm drop £250 2x heated front screens in very good condition, no cracks/chips £70 each Normal front screen, good condition, no chips etc £40 Electric 3.5 mirrors with base plates £40 Wheels Comp mo's 5 spoke design in grey, 7x16 et35 in good condition, come with yoko prada 2's 205/40/16 with plenty of tread left £350 5 spoke gti wheels in black with toyo proxes tr1's 195/45/15 tyres. plenty of tread left, wheels a bit rough but all caps present £100 5 spoke gti wheels refurbed in grey with caps, no curb marks, 2x toyo tr1's 195/45/15 and 2 prada's 195/50 all tyres like new £150 Azev a's with caps sprayed in graphite grey, good condition with very good 195/45/15 tyres, 7x15 et 35 very rare in this size/fitment £250 azev a's with caps in silver with tyres, 2 pradas and 2 yoko s drives, good tread and condition, 7x15 et 35 again in rare fitment £250 Thats off the top of my head. I have 2 weeks of as of the 14th so will be adding much more and loads of pictures then, Some stuff will be going on ebay. Can post some bits but collection prefered Located in Woking or Byfleet in Surrey |
|
| Author: | booker [ Tue Jul 12, 2011 1:08 am ] |
| Post subject: | Re: Clearout cvh and zetec uprated parts |
Wow that's a collection of bits Any pics of the azev wheels when you get the chance and what condition are the turbo spoilers in is there many studs missing
|
|
| Author: | Chris [ Tue Jul 12, 2011 1:54 am ] |
| Post subject: | Re: Clearout cvh and zetec uprated parts |
Pics of cage? |
|
| Author: | Robsonwill [ Tue Jul 12, 2011 3:05 pm ] |
| Post subject: | Re: Clearout cvh and zetec uprated parts |
I'd like a rear strutt brace, need to be posted though! |
|
| Author: | rs220bhp [ Tue Jul 12, 2011 4:08 pm ] |
| Post subject: | Re: Clearout cvh and zetec uprated parts |
| Author: | rs220bhp [ Tue Jul 12, 2011 4:10 pm ] |
| Post subject: | Re: Clearout cvh and zetec uprated parts |
| Author: | rs220bhp [ Tue Jul 12, 2011 4:12 pm ] |
| Post subject: | Re: Clearout cvh and zetec uprated parts |
| Author: | Dashie [ Tue Nov 26, 2013 8:17 pm ] |
| Post subject: | Re: Clearout cvh and zetec uprated parts |
Do you still have any of these parts ???? |
|
| Author: | onslack [ Thu Nov 28, 2013 11:31 am ] |
| Post subject: | Re: Clearout cvh and zetec uprated parts |
highly doubtful as the original thread was started in 2011 , you never know you might be in luck! if he comes back online anytime soon |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|