22 fronts tyres 4 rear in 2.5 years hmmm
@60mm
not ne more camber adjustable wishbones! normal tyre wear at 60mm!
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| how many of you suffer poor tyre wear ? https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=9531 |
Page 1 of 1 |
| Author: | leerst [ Sat Dec 08, 2007 5:14 pm ] |
| Post subject: | how many of you suffer poor tyre wear ? |
just wonderd how many of you suffer terrible tyre wear on the inside edge of the front tyres, ???? and is it perminent, or does it go away for a while when you change the front arms, ??? im lowered 40mm, so what sort of wear can i expect, just ruined the insed20mm of my new yokohama tyres, next time ill be going for directional so i can have them swapped sides when they start wearing. and how many of you have curred yours |
|
| Author: | xmadxmoex [ Sat Dec 08, 2007 5:17 pm ] |
| Post subject: | |
i dont really have much trouble and im 60mm.. have your camber/tracking checked |
|
| Author: | leerst [ Sat Dec 08, 2007 5:28 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Sat Dec 08, 2007 6:09 pm ] |
| Post subject: | |
| Author: | leerst [ Sat Dec 08, 2007 6:15 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Sat Dec 08, 2007 6:33 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Sat Dec 08, 2007 7:31 pm ] |
| Post subject: | |
22 fronts tyres 4 rear in 2.5 years hmmm @60mm
not ne more camber adjustable wishbones! normal tyre wear at 60mm!
|
|
| Author: | leerst [ Sat Dec 08, 2007 8:51 pm ] |
| Post subject: | |
you got the area 6 ones, or the ones that are standard ones drilled out with rose joints wleded in ???? |
|
| Author: | happypaul [ Sun Dec 09, 2007 12:41 am ] |
| Post subject: | |
mines bad no 60mm going up to 35mm soon will mod the wishbones if it wear much at 35mm |
|
| Author: | xmadxmoex [ Sun Dec 09, 2007 11:58 am ] |
| Post subject: | |
| Author: | fiestasiphil [ Sun Dec 09, 2007 3:46 pm ] |
| Post subject: | |
| Author: | fiestasiphil [ Sun Dec 09, 2007 3:50 pm ] |
| Post subject: | |
| Author: | leerst [ Sun Dec 09, 2007 8:07 pm ] |
| Post subject: | |
i see, well, im just gunna try new front arms for now, and if its still bad then ill mod the arms, not paying 250 for front arms when i only payed 200 for the car lol |
|
| Author: | Fezzyzetec [ Mon Dec 10, 2007 12:38 pm ] |
| Post subject: | |
| Author: | leerst [ Mon Dec 10, 2007 10:57 pm ] |
| Post subject: | |
fezzytec, what have you done to your camber then? drilled out the ball joints? |
|
| Author: | happypaul [ Mon Dec 10, 2007 11:57 pm ] |
| Post subject: | |
I think he has standard wishbones with polybushes in |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|