i agree with fitting it before the sprayjob is done.. will all have the same color coat then
if your really bothered about it id get a couple of tins and spray it up though just to blend a little bit
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| xr kit and spraying.. not sure.. https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=6143 |
Page 1 of 1 |
| Author: | happypaul [ Mon Mar 19, 2007 1:31 am ] |
| Post subject: | xr kit and spraying.. not sure.. |
Righty-ho Another one of my stupid questions again.. As you might have seen the pictures of my car and bits of the rear arch is covered in primer due to attacking rust yonks ago and also a new wing still in black has been fitted.. Now I want to fit the xr skirts and arches to the 5 door.. SO Do I, spray the kit, stick it to the car and all that modding to the back door bit.. and leave the black wing and the primer, and then when it gets fully resprayed, it will get sprayed with the kit already on it.. OR Do I get the car sprayed up, then fit the kit.. ?! Bearing in mind I might want to smooth it into the arches, not sure yet tho Cheers |
|
| Author: | andyleesy [ Mon Mar 19, 2007 1:47 am ] |
| Post subject: | |
i think you'd achieve best results if you got the kit fitted with your car being sprayed at the same time. thats what i'd do, unless you wanted them kit on desperately in which case i'd do the 1st option probably not much help cheers andy |
|
| Author: | xmadxmoex [ Mon Mar 19, 2007 12:45 pm ] |
| Post subject: | |
i agree with fitting it before the sprayjob is done.. will all have the same color coat then if your really bothered about it id get a couple of tins and spray it up though just to blend a little bit
|
|
| Author: | jdfiesta [ Mon Mar 19, 2007 1:39 pm ] |
| Post subject: | |
spray the kit at the same time as car, but dont spray it fitted JJ |
|
| Author: | happypaul [ Mon Mar 19, 2007 1:39 pm ] |
| Post subject: | |
| Author: | happypaul [ Mon Mar 19, 2007 1:42 pm ] |
| Post subject: | |
| Author: | happypaul [ Tue Mar 20, 2007 2:27 am ] |
| Post subject: | |
Is it a good idea to smooth the arches into the bodywork? Is the possibility of them cracking high? |
|
| Author: | xmadxmoex [ Tue Mar 20, 2007 9:17 am ] |
| Post subject: | |
as long as its done with some of that flexy filler (tay might know what im onabout) you should be fine |
|
| Author: | jdfiesta [ Tue Mar 20, 2007 10:28 am ] |
| Post subject: | |
chances of them cracking is very high! i wouldnt bother |
|
| Author: | spiky [ Tue Mar 20, 2007 11:39 am ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|