| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| turbos discs https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=4169 |
Page 1 of 1 |
| Author: | flipsi16v [ Mon Oct 30, 2006 2:24 pm ] |
| Post subject: | turbos discs |
would rs turbo discs go on the si |
|
| Author: | fiestasiphil [ Mon Oct 30, 2006 2:35 pm ] |
| Post subject: | |
i think there the same as 1.6 16v si discs |
|
| Author: | flipsi16v [ Mon Oct 30, 2006 2:37 pm ] |
| Post subject: | |
also would a rst strut brace fit on aswell not too sure |
|
| Author: | fiestasiphil [ Mon Oct 30, 2006 2:42 pm ] |
| Post subject: | |
nope as i'm guessing your si is a 16v not a cvh 1.4 |
|
| Author: | Percy [ Mon Oct 30, 2006 2:52 pm ] |
| Post subject: | |
mk3 fiesta brakes are either vented or not, the rs's and Sis are both vented and no different. The strut braces for the 16v engines are different to the RST. |
|
| Author: | lucasdemoley [ Mon Oct 30, 2006 3:32 pm ] |
| Post subject: | |
the si and rs calipers are the same, and have the same disks (apparently). As for strut brace, the ones for the cvh go over where the zetec inlet manifold is and basicly would foul on it. Ones specific for a zetec fiesta can be had, but are around the £100 mark. |
|
| Author: | Paul [ Mon Oct 30, 2006 8:17 pm ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|