So wot iz the difference berween carb's and throttle bodies??? Pics might help! cheers!!!!!!!!! and how much do ya think for either one??? Also found megasquirt brand new for 100 quid on http://www.americanv8engines.co.uk
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Carb's on a zetec SI???? https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=2970 |
Page 1 of 2 |
| Author: | oggyzetec05 [ Mon Jun 05, 2006 3:21 pm ] |
| Post subject: | Carb's on a zetec SI???? |
I was wondering if you could put carb's on a 1.6 zetec??? If so where frm and how much??? i know all about megasqurit etc... just wondering which carb's???? cheers!!!! |
|
| Author: | xmadxmoex [ Mon Jun 05, 2006 4:48 pm ] |
| Post subject: | |
| Author: | jdfiesta [ Mon Jun 05, 2006 4:49 pm ] |
| Post subject: | |
| Author: | scotty_boy BSc [ Mon Jun 05, 2006 5:15 pm ] |
| Post subject: | |
| Author: | Paul [ Mon Jun 05, 2006 7:14 pm ] |
| Post subject: | |
| Author: | scotty_boy BSc [ Mon Jun 05, 2006 7:45 pm ] |
| Post subject: | |
Complicate? It's becoming less complex by taking the EFI crap off it. What's more simple than an engine, two carbs, a fuel line and a dizzy? Zetecs preform pretty good on carbs, that's why people use them. I'd go for carbs over ITBs as I know it can be done at half the cost at the outset. Debatably the car would be more fuel efficent on ITBs due to the engine management but why follow everyone else down the same path? |
|
| Author: | oggyzetec05 [ Mon Jun 05, 2006 7:58 pm ] |
| Post subject: | |
So wot iz the difference berween carb's and throttle bodies??? Pics might help! cheers!!!!!!!!! and how much do ya think for either one??? Also found megasquirt brand new for 100 quid on http://www.americanv8engines.co.uk
|
|
| Author: | scotty_boy BSc [ Mon Jun 05, 2006 8:58 pm ] |
| Post subject: | |
| Author: | Raymondo [ Mon Jun 05, 2006 10:02 pm ] |
| Post subject: | |
| Author: | xmadxmoex [ Mon Jun 05, 2006 10:15 pm ] |
| Post subject: | |
| Author: | oggyzetec05 [ Tue Jun 06, 2006 4:37 pm ] |
| Post subject: | |
so all you need is mega-squirt, a t/b manifold and either a bike t/b or specialised zetec 1. and also what injectors would you use? 330cc or more or what??? and also fuel rail?? |
|
| Author: | BFG [ Tue Jun 06, 2006 8:27 pm ] |
| Post subject: | |
| Author: | luke89 [ Sun Jun 11, 2006 1:12 am ] |
| Post subject: | |
think i can help on this post wooo lol to run meag squirt u need a loom adapter what i can suply the diagram to u also need to run external EDIS and u need to remove the Internal PATS , u will have more respons on ITB then carbs because its mapable also more power as u can get the right amount of fule at every point in the rev range . to run ITB'S like mine ( home build ) ur be lookin at : set of bodies 42+ mm ( 4 bodies lol ) inlet manifold inejcters loom edis fule regulater ( cosworth 2wd one ) lots of fule pipe ( EFI shit for 10+ bar ) custom fule rail spanced tb's and linkage so it all fits some form of air filter managemnt some one to map it ( maby ur self on mega squirt ) and then the normaly parts u add like 4-2-1 manifold and decat and back box u should be lookin 160bhp out of the 1.8 or 2.0ltr and then on top of that ur need to mod the bodies by blockin holes addin 4 8mm vacum pipes for the brakes lol and lots of 4mm vacum pipe to run the built in maf / map in the mega squirt , cant think if i left anything of but bodies sound much nicer than carbs lol IMO heres a cople of pics of mine  ( fineshed but not together prop )
any more help just ask lol |
|
| Author: | oggyzetec05 [ Mon Jun 12, 2006 2:34 pm ] |
| Post subject: | |
Just to price things up...... seen on http://www.americanv8engines.co.uk mega squirt for £100 brand new. Also on ebay i saw a few inlet manifolds for zetec for around £100, Which will take gsxr 750 t/b's. Think they are just under £300. Also need fuel rail and injectors, but dunno which one's or how much? cheers |
|
| Author: | xmadxmoex [ Mon Jun 12, 2006 2:55 pm ] |
| Post subject: | |
looking good matre.. what air intake method you looking at using with them? airbox or all separate filters? |
|
| Author: | oggyzetec05 [ Mon Jun 12, 2006 10:59 pm ] |
| Post subject: | |
I was thinkin prob air horns or some nice shiny k+n's!
|
|
| Author: | luke89 [ Mon Jun 12, 2006 11:41 pm ] |
| Post subject: | |
ill be havin horns for the nos as theres no were else to tap in to lol , i am usin st170 injecters or look for some 330 ones ur fule rail will have to be made to how far ur inecjets are spaced
|
|
| Author: | oggyzetec05 [ Tue Jun 13, 2006 9:36 am ] |
| Post subject: | |
would fusion fabrications do it do ya think?????? where did ya get ur's from??? |
|
| Author: | luke89 [ Tue Jun 13, 2006 1:33 pm ] |
| Post subject: | |
| Author: | scotty_boy BSc [ Tue Jun 13, 2006 4:24 pm ] |
| Post subject: | |
It's fuel, dude 
|
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|