Hi, a K&N banana pipe will fit onto a 2.0 zetec throttle body but the other end will not fit a 2.0 zetec MAF, you will need an adaptor to fit the bigger MAF
Hope that helps!
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Induction Pipe https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=22520 |
Page 1 of 1 |
| Author: | R5AAL [ Wed Jun 08, 2011 10:23 pm ] |
| Post subject: | Induction Pipe |
Hey guys, Just fitted a 2.0L Zetec in my mk2 XR2, i'm in need of an induction pipe to connect my throttle body and MAF, thought someone here would know if a Fiesta Si K&N banana pipe fits the 2.0L throttle body? Cheers |
|
| Author: | Mole259 [ Wed Jun 08, 2011 10:35 pm ] |
| Post subject: | Re: Induction Pipe |
Hi, a K&N banana pipe will fit onto a 2.0 zetec throttle body but the other end will not fit a 2.0 zetec MAF, you will need an adaptor to fit the bigger MAF Hope that helps!
|
|
| Author: | R5AAL [ Wed Jun 08, 2011 10:38 pm ] |
| Post subject: | Re: Induction Pipe |
Thanks very much, exactly what i needed to know. |
|
| Author: | james_rs [ Sun Jun 12, 2011 9:59 am ] |
| Post subject: | Re: Induction Pipe |
worth noting, you can make the other end fit the maf with some force... (heat!) |
|
| Author: | vw_99_bmx [ Mon Jun 13, 2011 9:06 pm ] |
| Post subject: | Re: Induction Pipe |
you not finished this yet andy, |
|
| Author: | stainlessmole [ Mon Jun 13, 2011 9:30 pm ] |
| Post subject: | Re: Induction Pipe |
I heard some people with track slags have just 'pikeyd' it by putting a slit or 2 on the pipe and joining it with a jubilee clip and electrical tape to stop leaks lol Best cold air intake to get IMO is not the one i have, but the one that gave me inspiration. Basically a 90degree silicone elbow from the throttle body, length of pipe and then another 90 degree elbow or 45 degree, maf and then intake. - You do need 20+mm bonnet spacers though if you don't want a nice dent in the middle of your bonnet when you shut it lol Mines the same principle, but after the maf i have a SS 'F' tube with 2 double cone filters on... fook me is it loud haha. I think the best intake to actually have is the standard box, drilled with a panel filter. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|