| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| help please https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=22087 |
Page 1 of 1 |
| Author: | si-moo95 [ Sat Apr 09, 2011 8:32 pm ] |
| Post subject: | help please |
hi please can anyone help me, i just bought an M reg fiesta si and would like to get a exhaust trim for it, but dont know what size i need, thanx |
|
| Author: | Chris [ Sat Apr 09, 2011 8:38 pm ] |
| Post subject: | Re: exhaust trim si |
arent they universal? you mean like those chrome tips? I'd say the standard rear tip is about 1 1/2" so get one that goes around there, but i'm sure they slide over and clamp on? |
|
| Author: | si-moo95 [ Sat Apr 09, 2011 8:41 pm ] |
| Post subject: | Re: help please |
hi yes the chrome tips, so many people telling me different thing so i thought id try here, the original exhaust is 70mm (3 and a half inches) if i have measured it right, looked on ebay and theres hundreds all different sizes for the chrome tips, blummin confused |
|
| Author: | Chris [ Sat Apr 09, 2011 8:57 pm ] |
| Post subject: | Re: help please |
So you've got an aftermarket exhaust and you want to put a chrome tip on it? Something like that? |
|
| Author: | si-moo95 [ Sat Apr 09, 2011 9:20 pm ] |
| Post subject: | Re: help please |
hi yes thats it, the only thing is i was told to measure it, so i measured the end of the exhaust on the car now and it measures 70mm then i was told to put a piece of paper to the end of exhaust so it make a black circle and measure the circle on the paper so i did and i got 65mm so i dont know what size i need, |
|
| Author: | Chris [ Sat Apr 09, 2011 9:23 pm ] |
| Post subject: | Re: help please |
 Buy a 70mm, I'm pretty sure it comes with bolts anyway to fix it in place so all you would have to do it tighten the bolts up more, as I think they are made so you slide them on and then bolt them up to the exhaust and just tighten it on, Could be wrong though.
|
|
| Author: | si-moo95 [ Sat Apr 09, 2011 9:25 pm ] |
| Post subject: | Re: help please |
lol what a nightmare, thanks so much for your help, very greatful 
|
|
| Author: | Chris [ Sat Apr 09, 2011 9:57 pm ] |
| Post subject: | Re: help please |
is it mild steel then not S/S? can just give it a light sand and bring back the shine? |
|
| Author: | The Loumiester [ Sun Apr 10, 2011 10:17 am ] |
| Post subject: | Re: help please |
Thats gonna be one big exhaust tip lol, I would agree with above and try bringing back the shine as it will look better and save you some money. |
|
| Author: | booker [ Sun Apr 10, 2011 9:24 pm ] |
| Post subject: | Re: help please |
autosol from halfrauds 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|