Hammerite
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Rebuilding ERST LSD Gearbox ? https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=21898 |
Page 1 of 1 |
| Author: | 95 Fiesta Si [ Mon Mar 14, 2011 11:59 am ] |
| Post subject: | Rebuilding ERST LSD Gearbox ? |
just bought another ERST LSD gearbox on ebay and collecting it this evening. Does anyone know how much this would cost for a refurb as I wouldn't not know how to do it myself, also anyone got any good contacts or a specialist that would do a good job of it or could most competent garages do it ? The box i just bought apparently works fine, but for peace of mind really want it fully refurbed |
|
| Author: | will121 [ Mon Mar 14, 2011 4:05 pm ] |
| Post subject: | Re: Rebuilding ERST LSD Gearbox ? |
generally a specialist job not a a normal garage one as most will just send it on to a specialist, if reported to be ok when removed i would be inclined to just fit it and give it a go, must be looking at around £250 to strip and rebuild with new bearings etc |
|
| Author: | 95 Fiesta Si [ Mon Mar 14, 2011 9:26 pm ] |
| Post subject: | Re: Rebuilding ERST LSD Gearbox ? |
how easy would it be to fit bearings and seals myself ? |
|
| Author: | DALSY [ Mon Mar 14, 2011 9:33 pm ] |
| Post subject: | Re: Rebuilding ERST LSD Gearbox ? |
its a tricky job rebuilding a box, you need a fifth gear puller, and plenty patience and mechanical knowhow My mate just got a gearbox built by G.E.A.R.S which has been very very reliable and hes pushing out big horsepower in his Firsta with teh Focus RS engine Give him a call fro a quote , i would recommend him |
|
| Author: | 95 Fiesta Si [ Mon Mar 14, 2011 9:38 pm ] |
| Post subject: | Re: Rebuilding ERST LSD Gearbox ? |
| Author: | - Danny Boy - [ Mon Mar 14, 2011 10:14 pm ] |
| Post subject: | Re: Rebuilding ERST LSD Gearbox ? |
Hammerite
|
|
| Author: | DALSY [ Mon Mar 14, 2011 11:03 pm ] |
| Post subject: | Re: Rebuilding ERST LSD Gearbox ? |
silver hammerite for the box mate, good enough http://www.gears.tv/ when you speak to Pete, mention that you know me, and Im a very good friend of John Armstrong ( John is currently testing there hybrid semi helical IB5 gearbox in his car) and that Ive recommended the company Hope you get sorted out mate, and if you decide to build it yourself , you can buy all the parts reqwuired, gaskets and bearings from Burton Power who I found where the cheapest and genuine Ford parts too |
|
| Author: | DALSY [ Mon Mar 14, 2011 11:10 pm ] |
| Post subject: | Re: Rebuilding ERST LSD Gearbox ? |
heres some pics of my box when i rebuilt it with new bearings and shaft   
|
|
| Author: | Sam_RSi [ Wed Apr 20, 2011 11:39 am ] |
| Post subject: | Re: Rebuilding ERST LSD Gearbox ? |
CTS are also very good. heard a lot of good stuff about them and the stage 2 lsd box in my car is done by them 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|