Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
Who makes these? https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=18987 |
Page 1 of 2 |
Author: | dougxr2i [ Sun Feb 21, 2010 1:30 pm ] |
Post subject: | Who makes these? |
Does anyone know who makes these wishbones and if there still available ![]() |
Author: | The Loumiester [ Sun Feb 21, 2010 2:54 pm ] |
Post subject: | Re: Who makes these? |
are they meant to be light weight or sumat? |
Author: | Percy [ Sun Feb 21, 2010 4:24 pm ] |
Post subject: | Re: Who makes these? |
Argos... is called Meccano! |
Author: | sjoyce666 [ Sun Feb 21, 2010 4:32 pm ] |
Post subject: | Re: Who makes these? |
Made by Deflex I have never heard any positives about them though, only ever problems !! Scott |
Author: | chop_suey [ Sun Feb 21, 2010 5:27 pm ] |
Post subject: | Re: Who makes these? |
they look gash |
Author: | Ry [ Sun Feb 21, 2010 5:48 pm ] |
Post subject: | Re: Who makes these? |
WHy do they have holes in them? Surely they'd be stronger as a whole piece.. |
Author: | The Loumiester [ Sun Feb 21, 2010 7:20 pm ] |
Post subject: | Re: Who makes these? |
what is the actual point to them? surely the standard once are as good as it gets? |
Author: | dougxr2i [ Sun Feb 21, 2010 7:52 pm ] |
Post subject: | Re: Who makes these? |
oh well looks like im gonna have to save up and get some areasix lower arms |
Author: | stainlessmole [ Sun Feb 21, 2010 9:02 pm ] |
Post subject: | Re: Who makes these? |
IMO Yeah, why not just have the ford ones, they are extremely cheap (£15 pair). Strong as you can get and not exactly heavy so you won't loose much by buying lightweight ones. |
Author: | dougxr2i [ Sun Feb 21, 2010 10:55 pm ] |
Post subject: | Re: Who makes these? |
i need ones were i can adjust camber cause tires do last me very long also i was only interested in those above wishbones because i'd seen someone else modify the ones they got to make them camber adjustable so i thought i'd have ago but im gonna leave it and get areasix ones |
Author: | onslack [ Mon Feb 22, 2010 10:03 am ] |
Post subject: | Re: Who makes these? |
they do look shite! drop happypaul a pm he made his own camber adjustable ones iirc for his pickup ![]() |
Author: | 95 Fiesta Si [ Mon Feb 22, 2010 3:38 pm ] |
Post subject: | Re: Who makes these? |
areasix adjustable wishbones are what you want, except i think they went bust but there ars still some 2nd hand floating about. Wonder if theres an alternative product out there somewhere. As said, he needs to adjust the camber angle so it doesnt eat tires. Need a set myself mate. |
Author: | onslack [ Mon Feb 22, 2010 4:16 pm ] |
Post subject: | Re: Who makes these? |
area six didn't go bust ![]() ![]() ![]() so i'd try give him a ring ![]() |
Author: | - Danny Boy - [ Mon Feb 22, 2010 5:15 pm ] |
Post subject: | Re: Who makes these? |
Yeah hes back ![]() If you want a cheap adjustable camber ones, what i would do is get some QH pattern ones - ive used them and i know people who have on 60mm drops and they last very well. Then either keep them as they are and make them adjustable camber, or if you want to go one better, get some poly bushes in there, and make them adjustable. Be alot cheaper, but if you get it wrong then thats the only downfall. |
Author: | 95 Fiesta Si [ Mon Feb 22, 2010 6:40 pm ] |
Post subject: | Re: Who makes these? |
Author: | dougxr2i [ Mon Feb 22, 2010 8:40 pm ] |
Post subject: | Re: Who makes these? |
im currently using QH ones they seem pretty good on my Si i've had one on for over a year now and is still going strong. Gonna see if i can buy some areasix ones shortly |
Author: | DALSY [ Tue Feb 23, 2010 11:17 pm ] |
Post subject: | Re: Who makes these? |
i run the area 6 bottom arms on my car and thyre very good Spherical bearings and camber adjutable ball jionts I had a set of Deflex bushes in Ford arms for 2 years and never had a failure, and for the money very good Id say.Deflex offer a lifetime warranty, whereas Powerflex dont, and theyre 3 times the price I have a set of Mk3 pattern balljionts ( 3 bolt) which have been machined to give the camber adjustement, Id sell them for £25 if anyone wants them, but remember for a MK3 , not MK3.5 |
Author: | fiestasiphil [ Wed Feb 24, 2010 12:39 pm ] |
Post subject: | Re: Who makes these? |
ive got the area six wishbones on my 2 litre si i bought them back in early 2007 cost £290 the pair but are camber adjustable with rose joints they made such a awesome difference to the handling and i get normal tyre wear at 60mm slammed ![]() ![]() |
Author: | dougxr2i [ Wed Feb 24, 2010 7:15 pm ] |
Post subject: | Re: Who makes these? |
Author: | DALSY [ Thu Feb 25, 2010 12:04 am ] |
Post subject: | Re: Who makes these? |
Page 1 of 2 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |