welcome
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Newbie - CW Looms * Web Site * https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=18857 |
Page 1 of 4 |
| Author: | CW Looms [ Mon Feb 08, 2010 5:20 pm ] |
| Post subject: | Newbie - CW Looms * Web Site * |
Hi all, Big thanks to the admin team for allowing us to start a thread advertise on FSI I’d like to introduce ourselves, we are CW Looms and we specialise in replicating and replacing your old tired and degraded wiring looms with new high quality items but can also produce custom looms to your spec. All of our Looms are over braided for wear resistance. Terminals are all crimped and heat shrink sealed We have designed our looms so that they require minimal DIY knowledge to fit, but Instructions are included They are designed by car enthusiasts for car enthusiasts Please feel free to email us for more info and a quote Email:- cw_looms@hotmail.co.uk Many Thanks CW Looms |
|
| Author: | cs detailing [ Mon Feb 08, 2010 5:31 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Welcome to FSI. |
|
| Author: | onslack [ Mon Feb 08, 2010 5:32 pm ] |
| Post subject: | Re: Newbie - CW Looms |
welcome
|
|
| Author: | Percy [ Mon Feb 08, 2010 5:34 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Good to have you on board, hopefully you will be useful to a good few members on here. Wish you where around when I has my fiesta as that needed a few things sorting. |
|
| Author: | andyleesy [ Mon Feb 08, 2010 10:53 pm ] |
| Post subject: | Re: Newbie - CW Looms |
didn't know there were places that did this kind of stuff. Very useful as my loom has seen better days.... |
|
| Author: | Ry [ Mon Feb 08, 2010 10:55 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Welcome! 
|
|
| Author: | TANGO [ Mon Feb 08, 2010 11:01 pm ] |
| Post subject: | Re: Newbie - CW Looms |
what kind of prices are you guys charging?? |
|
| Author: | CW Looms [ Mon Feb 08, 2010 11:50 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Thank you for the warm welcome. TANGO With regards to your question about prices, it would depend on what you were after as lots of things can effect the cost. Please feel free to E-mail us or send us a PM on the forum to discuss your requirements Email:- cw_looms@hotmail.co.uk Many Thanks CW Looms |
|
| Author: | Dave G fsi [ Tue Feb 09, 2010 7:05 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Welcome 
|
|
| Author: | CW Looms [ Tue Feb 09, 2010 8:53 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Here is a picture of a loom we made recently for a customer. Custom lengths and wire thickness, Fused relay ( removes the need for inline relays )   
|
|
| Author: | The Loumiester [ Tue Feb 09, 2010 9:23 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Welcome! |
|
| Author: | cs detailing [ Sat Feb 13, 2010 1:05 pm ] |
| Post subject: | Re: Newbie - CW Looms |
You have a PM |
|
| Author: | Mattyboy Esq [ Sat Feb 13, 2010 3:18 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Welcome, heard good things about yourselves? Fancy rebuilding a full loom for the Rallye?
|
|
| Author: | CW Looms [ Sat Feb 13, 2010 6:32 pm ] |
| Post subject: | Re: Newbie - CW Looms |
| Author: | Mattyboy Esq [ Sat Feb 13, 2010 6:33 pm ] |
| Post subject: | Re: Newbie - CW Looms |
PM sent 
|
|
| Author: | CW Looms [ Sat Feb 13, 2010 8:36 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Recieved, Thank you, will be in contact |
|
| Author: | happypaul [ Sat Feb 20, 2010 9:08 pm ] |
| Post subject: | Re: Newbie - CW Looms |
Sweet Welcome. |
|
| Author: | onslack [ Sun Feb 21, 2010 8:23 pm ] |
| Post subject: | Re: Newbie - CW Looms |
i have been in contact with CW about making me another fuel pump loom as i dont like my relay in my spare wheel well  wil get some pic's up when it arrives 
|
|
| Author: | happypaul [ Sun Feb 21, 2010 8:40 pm ] |
| Post subject: | Re: Newbie - CW Looms |
| Author: | onslack [ Mon Feb 22, 2010 10:51 am ] |
| Post subject: | Re: Newbie - CW Looms |
this is what i have just bought http://cgi.ebay.co.uk/Cosworth-Uprated- ... 3a58047849 only difference is mine will have different connectors as i dont have an 044 pump....yet should be with me in a few days, may go collect it tho as they are sort of down the road from me look at that sexy braiding  , is it wrong to have the horn over some wire?  
|
|
| Page 1 of 4 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|