a year older
i dont think theres a difference
| Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
| Car Park Dings Repair https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=1859 |
Page 1 of 1 |
| Author: | RoryT [ Wed Nov 23, 2005 12:15 am ] |
| Post subject: | Car Park Dings Repair |
Just wondering if getting parking dings repaired is cheap or expensive? On an SI with a small ding approx. how much should i be looking at spending? Oh yeah, are there were any technical differences between the M-reg SI's and the N-reg SI's? Been bugging me for the past few days now. |
|
| Author: | Mouse [ Wed Nov 23, 2005 12:22 am ] |
| Post subject: | |
a year older i dont think theres a difference
|
|
| Author: | RoryT [ Wed Nov 23, 2005 12:25 am ] |
| Post subject: | |
| Author: | scotty_boy BSc [ Wed Nov 23, 2005 12:43 pm ] |
| Post subject: | |
| Author: | lucasdemoley [ Wed Nov 23, 2005 9:11 pm ] |
| Post subject: | |
| Author: | RoryT [ Thu Nov 24, 2005 12:54 am ] |
| Post subject: | |
| Author: | fiestasiphil [ Thu Nov 24, 2005 2:49 pm ] |
| Post subject: | |
| Author: | luke89 [ Thu Nov 24, 2005 3:26 pm ] |
| Post subject: | |
do it your self with some filler as long as its all preped right it shouldnt crack, then just get the same colour paint from halfords ( dnt mask up it will leave lines !) then spray primer then rub it down ( wet 1200 wet and dry ) then paint 
liek this ( there is filler under that primer some were lol ) 
after paint but no rub down or ploish 
|
|
| Author: | RoryT [ Thu Nov 24, 2005 3:41 pm ] |
| Post subject: | |
What were u wearing to do that respray? i can see some huge head in the window reflection! |
|
| Author: | scotty_boy BSc [ Thu Nov 24, 2005 4:26 pm ] |
| Post subject: | |
Lukes method is a big dodgy How do you get a proper colour match, would look a bit patchy. why not just take the 1/4 trim out and knock it out?
|
|
| Author: | luke89 [ Thu Nov 24, 2005 7:10 pm ] |
| Post subject: | |
helmet lol was just going out at the time ( on the ped ) i had a colour match from ford  and nope its perfect colour , didnt want to take all the trim out as there was a bit of rust that was removed as well so thought mite as well just do it that way
|
|
| Author: | Paul [ Thu Nov 24, 2005 7:14 pm ] |
| Post subject: | |
they dont hammer it out, they use special clamp like tools (frm what i've seen), which bend the metal back outward and so most of the time you won't even lose any paint either, mouse prob knows how to do all this kind of repair? obv big dents need hammering but our local guy (dent devils) uses some weird bendy metal tools and no hammer 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|