Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
gearbox help - where have i gone wrong https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=17822 |
Page 1 of 1 |
Author: | olly [ Sun Oct 11, 2009 8:30 pm ] |
Post subject: | gearbox help - where have i gone wrong |
put my 1.1 box on today got old one off fine was going to fit my release bearing but wouldnt go on the 1.1 box so put that back on (this is where i think ive gone wrong as im not sure it was on right and could make a differnace not sure) fitted it all back to gether fine put everything back on starts it up and the clutch works the oppersite way round to what it should press the clutch down for it to bite/go and with the pedal up is off if that makes sense to anyone any help on this would be great gonna to have to take it all off again and start again but thought someone may have heard of this before and know where i have gone wrong |
Author: | Jam [ Mon Oct 12, 2009 12:11 pm ] |
Post subject: | Re: gearbox help - where have i gone wrong |
by the sounds of it..what ever you have done wrong will mean the box has to come off anyways...only thing i can think of is the bearing has got jammed in the pressure plate and is making it work like a pull clutch rather than a push clutch..but i wouldnt have thought that possible..have you had the clutch off...did you put the friction plate in the right way round? Jam. |
Author: | Fizzy T [ Mon Oct 12, 2009 12:16 pm ] |
Post subject: | Re: gearbox help - where have i gone wrong |
I've never heard of that happening before. |
Author: | olly [ Mon Oct 12, 2009 2:40 pm ] |
Post subject: | Re: gearbox help - where have i gone wrong |
sorted the box didnt have to come off i lifted the clutch pedal like a twat with made the cog on back of it spin round so it was back to front all fixxed and working well ![]() |
Author: | Dave G fsi [ Mon Oct 12, 2009 7:48 pm ] |
Post subject: | Re: gearbox help - where have i gone wrong |
Glad to hear you got it all sorted mate! Bet it would be quite interesting trying to drive a car with a reverse clutch! ![]() ![]() |
Author: | godrikki 2_0si [ Mon Oct 12, 2009 7:56 pm ] |
Post subject: | Re: gearbox help - where have i gone wrong |
glad you got it sorted sounded really confusing ![]() |
Author: | olly [ Mon Oct 12, 2009 11:09 pm ] |
Post subject: | Re: gearbox help - where have i gone wrong |
yeah bit hard to explain properly but if you got in it you would know what i ment stright away |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |