Fiesta-Si.com https://www.fiesta-si.com/forums/ |
|
mk3 an d mk4 https://www.fiesta-si.com/forums/viewtopic.php?f=1&t=17776 |
Page 1 of 1 |
Author: | stewiemk4 [ Tue Oct 06, 2009 5:55 pm ] |
Post subject: | mk3 an d mk4 |
does anyone know if the dashboard out my si will fit into a mk4 fiesta?? thanks |
Author: | Dave G fsi [ Tue Oct 06, 2009 7:45 pm ] |
Post subject: | Re: mk3 an d mk4 |
I've never heard of that being done before, but I would say that because the mk4 dash fits in the mk3, the mk3 dash will fit in the mk4. Probs just take a bit of messing about ![]() |
Author: | stewiemk4 [ Wed Oct 07, 2009 12:12 pm ] |
Post subject: | Re: mk3 an d mk4 |
my mate said they wont, fit something to do with the heater matrix being differant.. but surly the heater matrix will swop over aswell.. as my si has been comdemed to the great scrapyard in the sky hahaha |
Author: | Percy [ Wed Oct 07, 2009 12:49 pm ] |
Post subject: | Re: mk3 an d mk4 |
I can't see why it won't fit, might be some messing but its mostly the same. |
Author: | happypaul [ Wed Oct 07, 2009 4:07 pm ] |
Post subject: | Re: mk3 an d mk4 |
For the heater matrix you will need a fit a MK3 one along with the heater box with the cable controls for the hot/cold & position of air blowers (legs, windscreen etc), and make 2 holes in the bulkhead for the matrix pipes to come through. And you will need to get rid of your MK4 blower on the right hand side of the bay under the scuttle panel, and block it off. As the MK3 blower will go in the middle where your heater matrix pipes currently come out of. Will be a fair amount of re wiring of switches and for the blower switch. You can keep the MK4 dials tho. |
Author: | stewiemk4 [ Wed Oct 07, 2009 6:23 pm ] |
Post subject: | Re: mk3 an d mk4 |
thanks, sounds like a winter project haha.. already fitted the si seats which are comin back out again to fit the carpet does anyone know if the si doorcards, electric window mechanism and the electric boot popper fit into the mk4 aswell? cheers ![]() |
Author: | happypaul [ Wed Oct 07, 2009 6:24 pm ] |
Post subject: | Re: mk3 an d mk4 |
Author: | stewiemk4 [ Wed Oct 07, 2009 6:40 pm ] |
Post subject: | Re: mk3 an d mk4 |
imagine a mk4 on the outside and a mk3 si on the inside lol |
Author: | happypaul [ Wed Oct 07, 2009 6:42 pm ] |
Post subject: | Re: mk3 an d mk4 |
Would be daft IMO.. Get hold of the MK5Black Dash and Doorcards, and use the mk3 wingbacks ![]() |
Author: | stewiemk4 [ Wed Oct 07, 2009 6:49 pm ] |
Post subject: | Re: mk3 an d mk4 |
ive got the wingbacks but i like the mk3 dash.. so much better lookin then the mk4 one |
Author: | Dave G fsi [ Wed Oct 07, 2009 10:00 pm ] |
Post subject: | Re: mk3 an d mk4 |
Agreed ![]() |
Author: | godrikki 2_0si [ Thu Oct 08, 2009 12:26 pm ] |
Post subject: | Re: mk3 an d mk4 |
cant be that hard to do as they are essentially the same shell with slight panel differences all the way to mk5 ![]() |
Author: | happypaul [ Thu Oct 08, 2009 3:57 pm ] |
Post subject: | Re: mk3 an d mk4 |
Author: | Op [ Thu Oct 08, 2009 10:04 pm ] |
Post subject: | Re: mk3 an d mk4 |
Author: | meilack [ Fri Oct 09, 2009 7:58 am ] |
Post subject: | Re: mk3 an d mk4 |
i agree, its baking hot ![]() |
Author: | Dave G fsi [ Sat Oct 10, 2009 10:58 am ] |
Post subject: | Re: mk3 an d mk4 |
Heater in my si is awesome ![]() |
Author: | godrikki 2_0si [ Mon Oct 12, 2009 7:53 pm ] |
Post subject: | Re: mk3 an d mk4 |
well my heater is poo ![]() |
Author: | Ry [ Mon Oct 12, 2009 9:23 pm ] |
Post subject: | Re: mk3 an d mk4 |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |