water pump and a timing belt i would sugest

_________________


fibre is my friend, more to come ;-) SI/T squirrel muncher

Defo change waterpump, they are 45.00 in motor factors, i just paid 27 quid for a new one off ebay if the waterpump goes, the cambelt has to come off if i remember rightly to change it, and for 45 quid its nothing.

Just make sure you get a Fiesta 1.6/1.8 Zetec waterpump for it, as the mondeo one spins the wrong way round !!

Get a cambelt kit and tensioners too for it!

i am mate of mate said that the plastic tensioners can shatter and should get metal/steel one's

what else would you guys recommend i replace for new apart from the parts mentioned above?

-Terry

You can use mostly 1.6 items if they are good working order as follows:

Alternator
Starter
Power Steering Pump

Use the 2.0 Oil Pump but put a shorter CVH/HCS oil filter on it.

Im buying a new clutch for mine.

New Sump gasket for when you take the sump off, new inlet and exhaust manifold gaskets, the crankcase breather pipe, take that off and either replace it or clean it like i did.

New Studs and nuts for the exhaust manifold, theres 8 - 10 i think and they are pretty rotten when you take them off so ideal to replace them to avoid snapping.

Just woke up so can't think of much more.

cheers mate,if and when you do think of more just add it in here

cheers
-Terry

Well ill be fitting mine soon, and im a fussy bugger, everything i do has to be right otherwise i won't do it at all, if somethings got to be replaced new ill replace it, i won't go ' oh it will be okay '.

Just ask if theres anything you need to know, when i first even began to think of a 2 litre i nearly gave up the idea straight away because i didn't know where to start, but once the lumps sitting in your garden theres no stopping you

i have offered to help stip it out of the mondy, i have got to buy and engine stand soon, damn i am going to be really excited when its out, but got to keep calm as i have to wait till march to put it in

Ive got an engine stand if you want it, brand new, i cant get my engine on it no matter how hard i try and no ones ever around to lend me a hand, though it would take a few to lift it i imagine, im not paying for a crane for one day just to get it on the stand

if u can get hold ov the metal ones then go for it coz ford keep changing them around from plastic to the metal ones

_________________


fibre is my friend, more to come ;-) SI/T squirrel muncher

personally, though, i've never had a problem with plastic idlers or tensioners. ever.

_________________

where abouts do you live mate, how much you after for it?

could i get the metal ones from fraud?

*Update*

-** better late than never i suppose, here are the pics of the body work that was done**-























































































































































well last week it was decided that instaed of just plating my sills they would be replaced, then with a quick look over the arches it they were to be replaced aswell

well she went in on friday night i was down the workshop all night helping out with little things here and there, got the drivers sill and arch done friday night and got the passenger side sill and arch done last night, both sides have had a skim of filler put on

the rear bumper was takn off and more rust was found anywho all the rust has been vapouised , she is staying done the workshop all week i shall be done to help out again this week we are going to get the rubbing down done and she is being give a new lick of paint next Sat ( just incase the guys who did all the hard work reads this i would like to say a bit thank to Bob, dont know his surname )

i shall be booking up her MOT for next week sometime

then the 2.0L shall be going in as flux took over my insurance policy on the 7th

well picked up the donor car yesterday ( for 2.0L conversion ) but unfortunately i am not going to have time to do the conversion before FITP as i first hoped , now that i have more time i am going to spend some time on the engine give it a lick of paint, new water pump , oil pump and other things

with all the money i have spent on it getting the body work done and making sure she is running right she wont be lowered either for FITP

on the other hand my new cossie brake discs and braided brake line kit arrived on Saturday so they might get fitted for FITP

*pics to come *

still got to add pics for the body work

Sounds good mate. Going to be pretty mint...

Nevermind about the 2L conversion, you'll get it done all in good time, and as the chaps at Grolsch say 'You cant rush these things'

Get the pics up soon though mate, look forward to seeing it at FITP...

Paul.

_________________
= SOLD

New Parts For Sale Thread - Click here
Paul_16v - Common sense modding for a tasteless generation....

cheers paul

yeah she does look really good a few more small things to sort out like a bit of rust showing on the passengers side front arch and thats it for the rust i think ( and hope )

she went through the MOT with out any probs

car sounding mint mate, can't wait to see it at fitp, i really want to look in 2 these brakes your getting fitted, as mine have well due to my driving style have well, errrrrr warped now so i need to upgrade the brakes in a few weeks or so, see you at fitp!!

_________________





Rip Ben Elvin (jam)

cheers fiestasiphil

yeah she is looking mint but as she is an everyday car she has car park dents and some scratches on the bumper from when i bought her

i went to tesco's with my other half and came out the house the next morning to find some wank face had scratched my newly spared panel , but luckly a mate of mine managed to t-cut it out

yeah the cossie brakes and fucking massive and really heavy nearly gave myself a hernia ( sp? ) when i picked the box up , i painted my calipers ages ago and they came out pretty crap

getting a bit nervous for FITP now

sounding pretty good fella.
i'll have to have a look at fitp.
i need to upgrade my brakes. they get hot too quick
got too much to do before fitp to worry about that though
JJ

_________________
My ebay stuff http://shop.ebay.co.uk/merchant/2.0zetec


Is that the best you can do?
www.volvot5.co.uk - www.germanshepherdsuk.co.uk
2000 V70 T5 SE - 2.3, 5 cylinder, 20V, VVT, Turbo, 250bhp, cream leather, climate control, the works!

cheers JD

i know what you mean i have loads to do but no got the funding to do it, so i am getting an alpine head unit and that will do me

Pics of the arches and stuff being done have now been added