Index Page Find us on Facebook  Find us on twitter  Follow our RSS Feed
It is currently Tue Oct 17, 2017 2:20 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 18 posts ] 
Author Message
PostPosted: Mon Aug 30, 2010 1:17 pm 
Offline
FSi Donator
FSi Donator

Joined: Sat Mar 05, 2005 2:36 pm
Posts: 2628
Location: Shropshire \ London \ Kent
Drives: BMW E90 330D M Sport
CUSTOM SAMCO INDUCTION HOSE

Ok been asked a few times about the diameters and dimensions of my Samco Induction hose so here it is.

Basically its made up of 3 parts, 2 samco hoses, a aluminum tube and 4 hose clips (2 each end of the tube, 1 on the throttle body and 1 and the maf)
Total cost for this mod should be about £50-£60 (Without the Filter itself)

Ive had to use bonnet raisers to help clear the gap between the samco hose and the bonnet when its shut.
This will fit any throttle body with an outer diameter of approximately 70mm.

Image

Image


Aluminum Tube.
Length: 220mm (22cm)
Inner Diameter: 66mm (6.6cm)
Overall Diameter: 70mm (7CM) - 2mm thick
Image


90 Degree Samco Hose (Part No. E90 70) RRP £24.27 Inc VAT
Inner Diameter: 70mm (7CM)
Overall Diameter: 800mm (8CM) - 5mm thick
Leg Lenth: 125x125mm (12.5x12.5cm)


45 Degree Samco Hose (Part No. E45 70)RRP £27.56 Inc VAT

Inner Diameter: 70mm (7CM)
Overall Diameter: 800mm (8CM) - 5mm thick
Leg Lenth: 125x125mm (12.5x12.5cm)
Image

Source:
http://www.samcosport.com/uk/rp_standard_elbows.asp
http://www.samcosport.com/uk/downloads/ ... 2010_2.pdf
Available Colours
Image
They also do premium colours of Blaze, Urban Camo, Pink, Ice White, Metallic Silver, Matt Black

Its a bitch to fit the hose at the MAF end as its bigger then the 70mm Samco hose but it will stretch over it.
You could use 2x 90 degree hoses and have the filter pointing right down instead of the 45 degree angle as seen in mine. The Hoses can be cut to length to suit your requirements. Ive cut my hoses back to show more tube and less hose.. The tubing i guess you would have to seek yourself, although i know Samco also do tubing in aluminum or carbon here: http://www.samcosport.com/uk/acc_alloy_jointers.asp
Lee at Fusion Fabrications also does them i think. PM me for his details

End Result:

Image

_________________
Image
Image


Last edited by 95 Fiesta Si on Mon Aug 30, 2010 2:54 pm, edited 8 times in total.

Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 30, 2010 1:45 pm 
Offline
The Sherminator!
The Sherminator!

Joined: Sun Mar 06, 2005 6:10 pm
Posts: 22211
Location: Somewhere
awesome!!! thanks for the info, going to come in rather handy :chill: :D


Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 30, 2010 1:52 pm 
Offline
FSi Donator
FSi Donator

Joined: Sat Mar 05, 2005 2:36 pm
Posts: 2628
Location: Shropshire \ London \ Kent
Drives: BMW E90 330D M Sport
onslack wrote:
awesome!!! thanks for the info, going to come in rather handy :chill: :D

no probs Terry :thumbsup:

_________________
Image
Image


Top
 Profile  
Reply with quote  
PostPosted: Mon Aug 30, 2010 8:47 pm 
Offline
Elite FSI Poster
Elite FSI Poster
User avatar

Joined: Thu Dec 25, 2008 12:16 am
Posts: 1516
Location: Southampton, Hampshire
Drives: 2004 Volvo S60 D5
thanks for that mate, i've been looking for ages for a intake that fits properly by the battery.
And it comes in puple :D

How high did you have to raise the bonnet?

_________________
Image
She's still alive! -23/02/2017


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 31, 2010 12:22 pm 
Offline
FSi Donator
FSi Donator

Joined: Sat Mar 05, 2005 2:36 pm
Posts: 2628
Location: Shropshire \ London \ Kent
Drives: BMW E90 330D M Sport
stainlessmole wrote:
thanks for that mate, i've been looking for ages for a intake that fits properly by the battery.
And it comes in puple :D

How high did you have to raise the bonnet?

well i got these ones http://www.autospecialists.co.uk/Releas ... t-415.html

not sure how high they are, maybe 20mm. ill measure them in a min

_________________
Image
Image


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 31, 2010 1:07 pm 
Offline
Elite FSI Poster
Elite FSI Poster
User avatar

Joined: Thu Dec 25, 2008 12:16 am
Posts: 1516
Location: Southampton, Hampshire
Drives: 2004 Volvo S60 D5
Ta :)

I found this

Image

_________________
Image
She's still alive! -23/02/2017


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 31, 2010 2:20 pm 
Offline
FSi Donator
FSi Donator

Joined: Sat Mar 05, 2005 2:36 pm
Posts: 2628
Location: Shropshire \ London \ Kent
Drives: BMW E90 330D M Sport
stainlessmole wrote:
Ta :)
I found this

same as the link i put in my original thread :lol:

95 Fiesta Si wrote:

_________________
Image
Image


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 31, 2010 4:10 pm 
Offline
Elite FSI Poster
Elite FSI Poster
User avatar

Joined: Thu Dec 25, 2008 12:16 am
Posts: 1516
Location: Southampton, Hampshire
Drives: 2004 Volvo S60 D5
Oh my bad lol :P

_________________
Image
She's still alive! -23/02/2017


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 31, 2010 4:20 pm 
Offline
Elite FSI Poster
Elite FSI Poster
User avatar

Joined: Thu Dec 25, 2008 12:16 am
Posts: 1516
Location: Southampton, Hampshire
Drives: 2004 Volvo S60 D5
this helps though :)

http://cgi.ebay.co.uk/Polished-Inductio ... arParts_SM

_________________
Image
She's still alive! -23/02/2017


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 31, 2010 5:05 pm 
Offline
Elite FSI Poster
Elite FSI Poster
User avatar

Joined: Thu Dec 25, 2008 12:16 am
Posts: 1516
Location: Southampton, Hampshire
Drives: 2004 Volvo S60 D5
I hope you don't mind me using your photo, but this just happened :)

Image

_________________
Image
She's still alive! -23/02/2017


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 31, 2010 5:37 pm 
Offline
David Dickinson Junior
David Dickinson Junior
User avatar

Joined: Mon Jun 19, 2006 10:18 am
Posts: 4250
Location: Near Birmingham
Drives: Like a boss
liking the purpleness, still would have the shiney bits though!!

_________________
Image

FEED ME MORE!!!!


Top
 Profile  
Reply with quote  
PostPosted: Tue Aug 31, 2010 10:40 pm 
Offline
FSi Donator
FSi Donator

Joined: Sat Mar 05, 2005 2:36 pm
Posts: 2628
Location: Shropshire \ London \ Kent
Drives: BMW E90 330D M Sport
stainlessmole wrote:
this helps though :)

Ebay Linky

good find mate :thumbsup:

stainlessmole wrote:
I hope you don't mind me using your photo, but this just happened :)

Image

looks good man. i kinda wished id got purple hoses as most of the cars purple :doh:

_________________
Image
Image


Top
 Profile  
Reply with quote  
PostPosted: Mon Oct 04, 2010 8:29 am 
Offline
Regular Poster
Regular Poster

Joined: Mon Apr 16, 2007 3:17 pm
Posts: 366
Location: Essex U.K
Drives: Xr2i 1.8 turbo
Sweet,
I been meaning to change my induction pipework,
i had a similar induction setup but was using 80mm shaped pipe from a mondeo induction kit, i fitted it after fitting bonnet raisers i took the raisers off the other morning droped my bonet down to close and created a powerbulge i mean outward dent doh im gonna copy your setup and use a small raisers :D

_________________
Image
buttery biscuit boost


Top
 Profile  
Reply with quote  
PostPosted: Wed Oct 06, 2010 9:00 am 
Offline
The Sherminator!
The Sherminator!

Joined: Sun Mar 06, 2005 6:10 pm
Posts: 22211
Location: Somewhere
just as an update on this, if you dont fancy having your pants pulled down buy samco, sfs have pretty much the same hoses and part numbers but cheaper :halo:

will update when mine arrive :thumbsup:


Top
 Profile  
Reply with quote  
PostPosted: Thu Oct 07, 2010 6:19 am 
Offline
Regular Poster
Regular Poster

Joined: Mon Apr 16, 2007 3:17 pm
Posts: 366
Location: Essex U.K
Drives: Xr2i 1.8 turbo
i managed to find whole lot on ebay for roughly £44 delivered, there's alot of people selling hoses for half the price, obvisouly the quality is a little less (4ply instead of 5) and it has a weird brand name printed on it and the hoses smell abit weird like off onion ha, the seller "nicenewcar" sells the hoses and "mrsilicone sells a 300mm aly pipe"
when i get a chance to fit it i'll up a pic (unless it looks pikey lol )

_________________
Image
buttery biscuit boost


Top
 Profile  
Reply with quote  
PostPosted: Tue Oct 12, 2010 4:14 pm 
Offline
New Member
New Member

Joined: Thu Nov 12, 2009 11:41 pm
Posts: 49
Drives: 2.0 Fiesta si
Where do you get all the alluminium bits from??
They look so good!! Did you get the samco direct replacement kit for 1.6 fiesta si as well as the custom bits??


Top
 Profile  
Reply with quote  
PostPosted: Tue Oct 12, 2010 6:10 pm 
Offline
The Sherminator!
The Sherminator!

Joined: Sun Mar 06, 2005 6:10 pm
Posts: 22211
Location: Somewhere
stainlessmole wrote:
this helps though :)

Ebay Linky


i bought mine from this link, you get Si kits from samco/their suppliers :thumbsup:


Top
 Profile  
Reply with quote  
PostPosted: Wed Oct 13, 2010 11:01 pm 
Offline
Regular Poster
Regular Poster

Joined: Mon Apr 16, 2007 3:17 pm
Posts: 366
Location: Essex U.K
Drives: Xr2i 1.8 turbo
yeha i got my pipe from that guy to :D then chopped abit off the end

Image

_________________
Image
buttery biscuit boost


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: Bing [Bot] and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron