Fiesta-Si.com
http://www.fiesta-si.com/forums/

elPaulios 2.0 Si - Lots of bits being bought :)
http://www.fiesta-si.com/forums/viewtopic.php?f=5&t=24464
Page 1 of 19

Author:  elPaulio [ Thu Oct 04, 2012 9:58 pm ]
Post subject:  elPaulios 2.0 Si - Lots of bits being bought :)

Right guys, as Ben has pointed out I dont have a build thread and seeing as my baby is nothing like how Henry Ford intended I guess I had better make one pronto!!

So, 3 years in one post, here we go:
My first car was a Diamond White 1.1 Popular Plus which had Si bumpers. stuck an Si interior in it, drove it for a few years then sold it.
Bought a Mondeo 2.0 Zetec engine in 2007 as I always planned to get another Mk3. Stripped it down and left it in bits in the garage.

Bought my little baby back in the summer of 2009 as a second car, she started as an Ash Black 1.6 Ghia but had Si bumpers, arch spats and interior when I bought it.
First thing I did was bought some new Lower arms, shocks off eBay and G-Max 30mm springs.
Not much happened to it between buying it and December last year when she lost a heap of oil and, i assume as i've not pulled the sump off the 1.6 yet, minced the crank shells. What ever she did it didn't sound pretty!!

So, the 2.0 needed rebuilt and put in pronto, I re-built it in a couple of days and then hired an engine hoist for a long weekend in January with the plan being to haul the fucked 1.6 out, swap everything over and stick the 2.0 in again... Simples!!
2 weeks of hire later and the engine was finally in, but my neighbours hated me and I can personally vouch that changing an engine by yourself, between the hours of 8pm and midnight, on your drive, in the snow is one of the most soul destroying yet immensely satisfying things you can do!

Since January not a lot has happened to the car,

I've modified the front bumper courtesy of a crash barrier. honest officer, road rage, rain and a slip road bend that's sharper than it looks had nothing to do with it :rolleyes:

There's now an A-piller with dual gauge pod on with oil pressure and temperature in it. After the 1.6 mincing itself i'm taking no chances!

I've got a set of FK Coilover. the fronts are fitted but i've just been too lazy to fit the rears.
All new polybushes fitted at the front, along with upgrading to a 16mm front ARB.

So, whats planned for my little go-kart??

Rear coilovers fitted
Rear trailing arm polybushes
2wd Cossie 4 pots to be fitted
Corner weight the coillies once all fitted
Oil change with Millers Nanodrive 5W40 (yes i want 27bhp like the Focus RS in Fast Ford too ;) )

Right, vodka and tiredness are starting to take their toll so ill finish here, but updates a plenty are planned :)

Paul

Author:  The Loumiester [ Thu Oct 04, 2012 10:02 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Sweet, get some picks up.

Author:  elPaulio [ Thu Oct 04, 2012 10:08 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Will dig some out tomorrow at work and put them up :)

Author:  onslack [ Fri Oct 05, 2012 12:15 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

nice write up there buddy, looking forward to the pics :thumbsup:

Author:  elPaulio [ Fri Oct 05, 2012 1:49 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Right, found some pics of the Fiesta, not a huge amount but will need to get some taken.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Will put some more up once I get some decent ones ;)

Paul

Author:  bensouthport [ Fri Oct 05, 2012 5:32 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

nice paul. glad you got it up! nice little history. shows commitment doing all the work at that time! especially when its on the drive and not in a bloody garage lol.

like the sound of the coilovers. what exhaust system you got on there?

Author:  The Loumiester [ Fri Oct 05, 2012 8:31 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Looks tidy, have you wacked the rear anti role bar on yet?

Author:  elPaulio [ Fri Oct 05, 2012 11:22 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Hi Ben,

Cheers, took a lot to get it finished mentally after a week of constant nights dicking about but worth it!
It's running a standard exhaust from the local factors but it actually sounds pretty sweet so in no rush to change it :)

Lou,
No, have one in the garage but my rear beam doesn't have the second set of mounts so have put it off :/

Paul

Author:  bensouthport [ Sat Oct 06, 2012 1:13 am ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

fair play paul, bit of a sleeper then ;)

did you uprate the servo at all or is it running the standard one? whats braking like on it?

Author:  elPaulio [ Sat Oct 06, 2012 7:00 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Running standard servo, but got a new modeo MC to put in a mk1 servo for when the 4pots go on.
Brakes just now are crap, but I think they just need a good bleed and change of fluid as its two years since I did it last!
Only problem is, I can't get a spanner to fit on te front nipples so trying to hold off until I change over the calipers!!

My Millers oil has arrived now too, so will get that changed over in the next few weeks. The Fez is taking a bit of a back seat at the mo, as the misses has just got a new Seat Leon FR so I'm driving about in our A4 just now as need to get that prepped and polished for selling it. Don't have room or three cars at home so the Fez is in my works car park looking sorry for itself ;)
Hopefully get the A4 sold soon and concentrate on sorting out the Fez for a few weeks, just in time for the snow ;)

Paul

Author:  bensouthport [ Sun Oct 07, 2012 10:02 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

glad you said its the a4 going and not the fez haha!

good job on repairing the wing btw paul, only just noticed it.

how are the coolant hoses you got? tempted to get some as i think ill need them!

sounds like you need to sort the brakes, especially with that power lol

Author:  elPaulio [ Mon Oct 08, 2012 11:22 am ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Yeah, couldnt get rid of the Fez, too much fun.
And the A4 is worth ten times what th Fez is so makes sense ;)

Samcos are ace, make the bay so much nicer than the standard Ford ones. Not to mention they are bullet proof as I was bursting the old ones left right and centre due to the head gasket letting exhaust gases into the cooling system. That was fun :)

Yeah, brakes are a bit wank but as long as you're expecting it and keep back they're ok. I don't do a great deal of back road driving so they work ok at present, but wanna get them sorted!

Paul

Author:  bensouthport [ Mon Oct 08, 2012 1:24 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

did you buy them direct from samco?

sounds like youve had fun with her lol. is it a lot of work to fit the 2 pots? bigger wheels and spaceage etc?

Author:  elPaulio [ Mon Oct 08, 2012 1:29 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

I bought them from Burton Power as they were the cheapest I could find.
But the kit doesn't come with the thermostat to heater matrix hose which is the one which had burst on mines so I got in contact with Samco and sent them my burst hose and they made a new one. Also sent them my new Ford Water pump to lower rad hose and they tweaked it so it fitted better :)

Had a thread on here when it was all happening early this year viewtopic.php?f=4&t=23832&p=306788 so don't know if Samco have updated the kit or who has it. Just noticed I also got the water rail to thermostat hose done too :)
Worth giving Mark Hale a shout (Mark Hale <[email protected]>) as he was the guy I was dealing with and got the hoses done for me. Will defo keep you right, decent bloke too :)

Paul

Author:  elPaulio [ Mon Oct 08, 2012 1:31 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Oh and the 4-pots, I dunno yet :D

Getting a set of inserts made to reduce it from M12 to M10 so that if they dont fit I'm not then stuck with drilled out hubs that my old calipers wont fit on.

As soon as they are here I'll be trial fitting them and seeing if I need spacers with my wheels or not.
From what I've read, depending on wheel config they will need spaced to a point and its a different front disc with the correct offset (can't remember which one but will find out) Other than that, plug and play :)

Famous last words......
Paul

Author:  bensouthport [ Mon Oct 08, 2012 1:34 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

so will that all be included in the new set now paul? yeah i remember the hassle you were going through and the pipe not fitting properly.

will send him an email soon Paul to enquire! thanks lar

just realised i called them 2 pots lol, was meant to say 2wd 4 pots! :doh:

haha well good look! longer studs if they need spacing? suppose it depends.

Author:  elPaulio [ Mon Oct 08, 2012 1:36 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Yeah, I thought i'd glance over your 2pot comment!! :D Ya plum ;)

Speak to him, not sure if you'd get it in the kit from Burton as they'll still be going through old stock I would have thought, but you could buy the kit from Burton and buy the two extra hoses direct from Samco.
Or ask Mark for a price from him for the complete kit and compare to the Burton plus hoses price.

Yeah, not sure on the longer studs, I hope not, can't be arsed changing them. Currently got 5mm spacer on with standard studs so hope that'll be enough.

Paul

Author:  bensouthport [ Mon Oct 08, 2012 1:39 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

fingers crossed its all together ha! i know its an expensive kit so will have to save my pennies!

well i think the max you can go before you have to put longer studs in is 6mm!

Author:  elPaulio [ Mon Oct 08, 2012 1:41 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

Yeah, not cheap, but as I was bursting them I thought itd be about the same price as a new set from Ford and look nicer!

Yeah, if they dont fit i'll need longer studs, end of... but fingers crossed :)

Paul

Author:  bensouthport [ Mon Oct 08, 2012 1:42 pm ]
Post subject:  Re: 1.6 Ghia that wants to be a 2.0 Si

true. looking forward to seeing the brakes anyway.

lovely si! glad you finaly got a thread started

Page 1 of 19 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/