Fiesta-Si.com
http://www.fiesta-si.com/forums/

silver top question
http://www.fiesta-si.com/forums/viewtopic.php?f=4&t=25552
Page 1 of 1

Author:  fiestaben126 [ Tue Mar 11, 2014 10:49 pm ]
Post subject:  silver top question

Hiya, I have bought a 1800 silver top from an xr2i & have been told I can use a rs1800 or xr2i engine loom is this true & I have been told if I use a rs1800 ecu it will then have the 130 bap like the rs 1800's do is this true ?

Author:  onslack [ Wed Mar 12, 2014 10:29 am ]
Post subject:  Re: silver top question

you could use any zetec loom/ecu to run the engine as long as the ecu matches and works on the loom you intend to use

i'm assuming this is going into a mk3 fez? if so id stick to the rs1800/xr2i zetec/16v si looms and ecu combo's

you'd need the cam's and the inlet from an rs1800 if you want to get near the 130 spec :thumbsup:

Author:  fiestaben126 [ Mon Mar 17, 2014 1:14 am ]
Post subject:  Re: silver top question

onslack wrote:
you could use any zetec loom/ecu to run the engine as long as the ecu matches and works on the loom you intend to use

i'm assuming this is going into a mk3 fez? if so id stick to the rs1800/xr2i zetec/16v si looms and ecu combo's

you'd need the cam's and the inlet from an rs1800 if you want to get near the 130 spec :thumbsup:


Cheers mate so xr2i or rs1800 ecu or loom cheers, & it's going in my mk 3.5 there's no other mods needed for it to go in just the engine mount & gonna try & get a rst gearbox would I need shafts aswell & would I need to change the gearbox cradle or does it all go on my original one ?

Author:  Razer [ Tue Mar 18, 2014 5:07 pm ]
Post subject:  Re: silver top question

All the same m8, and you mean a erst gearbox? Frst has no lsd and is the same as a 1800.

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/