Index Page Find us on Facebook  Find us on twitter  Follow our RSS Feed
It is currently Mon Jul 16, 2018 3:26 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: ignition barrel
PostPosted: Wed Mar 07, 2012 3:02 am 
Offline
Regular Poster
Regular Poster

Joined: Sun Jun 08, 2008 8:55 pm
Posts: 266
Location: Leicestershire
Drives: 1.6 Si
just bought my second Si just as the guy gave me the keys he said the barrel is new and thees a nack to start it

10 mins down the road and it wont engauge the starter position (after lots of trying and fidling it will) and have since got the nack how to start it but its not ideal



so was wondering which 2 wires do i need to connect for an Engine start button, the key turns to position 2 fine thus priming the pump etc but is temperamental on th actual start position

Ebay Linky

found a nice cheap one, the only other option is another barrel but i assume i then need another key kut with a transponder and i know they can cost a few £££


Top
 Profile  
Reply with quote  
 Post subject: Re: ignition barrel
PostPosted: Wed Mar 07, 2012 8:11 pm 
Offline
Poster
Poster

Joined: Thu Jan 20, 2011 10:57 pm
Posts: 80
i wrote a guide for fiesta guides on how to change the barrels and chips in the keys

heres the link...

http://www.fiestaguides.co.uk/content/m ... _pats.html


Top
 Profile  
Reply with quote  
 Post subject: Re: ignition barrel
PostPosted: Wed Mar 07, 2012 9:39 pm 
Offline
Regular Poster
Regular Poster

Joined: Sun Jun 08, 2008 8:55 pm
Posts: 266
Location: Leicestershire
Drives: 1.6 Si
LEGEND

i was told it had a new barrel but seems to have a pin and a screw missing so until i can get a new ive cut the steering lock off and using a screw drive just in the black box bit

still need the key next to the pats reciever so should be okay




i ran my old one like this for months :rolleyes:


Top
 Profile  
Reply with quote  
 Post subject: Re: ignition barrel
PostPosted: Thu Mar 08, 2012 6:17 pm 
Offline
Poster
Poster

Joined: Thu Jan 20, 2011 10:57 pm
Posts: 80
new barrel should run smooth, hope that helps you out for the future running of your car... also, if you want to put a start button in, get wire the same guage as the wires on the ign switch, and tap into the black (switched live) and the black/blue (starter) wires get a button suitable to handle the amps, i used a control gear button used on industry panels, works great


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron