for anybody wanting to do a 2.0 conversion check here for what parts are needed

http://www.fiestaturbo.com/zetecconversions/



Terry

edited

_________________
My ebay stuff http://shop.ebay.co.uk/merchant/2.0zetec


Is that the best you can do?
www.volvot5.co.uk - www.germanshepherdsuk.co.uk
2000 V70 T5 SE - 2.3, 5 cylinder, 20V, VVT, Turbo, 250bhp, cream leather, climate control, the works!

cheers jd, i forgot to add that it was for parts ,edited now tho

So what ECU's are you guys using with your Si's for 2 litre conversions? I have a non-pats ECU sitting here, which obviously I could wire in with a bit of hacking around and an external EDIS module.. but from what this guide suggests, the Si having external PATS means you can run any PATS mondeo ecu? I would have thought that wouldn't work to be honest, as the internal PATS in the ECU would not work right...... let me know your experiences!

_________________
Zetec Mapping Services

IIRC the only 3 that will work with fiesta conversion are DESK DEWY DEEP ECU's

as these are external pats? same as the fiesta so its just plug and play

yeah you are right moe, these are the tried and tested ecu's. i think others have been tried and found that they dont work, but i am not sure on that so dont hold me to that

_________________
My ebay stuff http://shop.ebay.co.uk/merchant/2.0zetec


Is that the best you can do?
www.volvot5.co.uk - www.germanshepherdsuk.co.uk
2000 V70 T5 SE - 2.3, 5 cylinder, 20V, VVT, Turbo, 250bhp, cream leather, climate control, the works!

any idea what other 'DE' prefixed manual mondeo ecu's are out there?

Just for interest.. pinout comparison between the 93/94 manual mondeo ecu's at the fiesta si one :



pin for pin..

_________________
Zetec Mapping Services

saqmaster thats a very hand screen shot

nice work

so do all si's have external pats?
reason being i looked at another si today and it had a 9 pin multi plug where mine is 12!!!

_________________

so what would be the best mondeo ecu to go for mate? as i need one, was looking at changing the pins on my escort gti ecu but im stuck on the crank sensors and not sure what pins they are on the escort ones

think it might be best to pm saqmaster as he's not on here very often any more

ill give it a try, but anyone?

I run one in mine 1800 escort, Id like to drive one with a 16si to see what diff there is. As mine has a good first gear 38mph shit 2nd gear good 3rd 4th and 5th 140 on the clock weve had it to that and still abit more to go

_________________


http://www.rikmarot.dsl.pipex.com/fiest ... apics.html

140mph from a 1800 escort? bit sceptical. and was that on a cable speedometer, or proper timing gear, as you will be over-reading massively at that kind of speed.

_________________




Kill List: Moped, School bus, 4 Cyclists.

soz i have a 1800 escort gearbox in a fiesta si with the 2.0 mondeo engine, Yes ive had 140 from the speedo

_________________


http://www.rikmarot.dsl.pipex.com/fiest ... apics.html

ahh my mistake

_________________




Kill List: Moped, School bus, 4 Cyclists.

bit of both

_________________


http://www.rikmarot.dsl.pipex.com/fiest ... apics.html

so whats quicker then, a si 2litre with 1.6 gearbox or a saxo vts, i drove the vts so im just after an idea of how fast it is.

_________________