Fiesta-Si.com
http://www.fiesta-si.com/forums/

lowsi's guide to fitting ST150 calipers and discs to your si
http://www.fiesta-si.com/forums/viewtopic.php?f=16&t=10262
Page 2 of 2

Author:  paynie [ Wed Jun 25, 2008 11:07 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

iv seen rear brakes for the MK3 u reacon you could just use front brakes and puting them on the rear??

Author:  DANIELP1991 [ Thu Jun 26, 2008 9:49 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

definately buy sum of them in the future

Author:  Luke1990 [ Fri Jun 27, 2008 9:03 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

paynie wrote:
iv seen rear brakes for the MK3 u reacon you could just use front brakes and puting them on the rear??


i asked the same thing in a different thread and the general feeling was a "no" im guess you wont be able to mound them on the rear hubs?

my brakes were bought of off the STOC for £120 with only 4k on them :) bargainous.

If i had the cash then i would have the pro kit, unfortunately i have neither :(

Unless your on a track grooved discs arent going to do much for your braking as generally your brakes wont get hot enough to glaze the pads, also theres a youtube video somewhere of greenstuff pads where in a fez he stops from 60 twice and then smoke pours off of the pads :(

Just to confirm, these brakes went straight on with no modification at all :D

Author:  - Danny Boy - [ Thu Jul 10, 2008 1:36 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

I might have to invest some money in the future on these! Do you think they would fit the normal mk3.5 fiesta? I presume they would as its pretty much the same car lol.

Author:  Jam [ Fri Jul 11, 2008 12:10 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

the reason you cant put them on the back is that on the fiesta the drum and hub are one piece... thus you take the drum off you have nothing to attach the disc to. you can use 130 spec escort mk5 stuff..fiesta centre do a kit that uses sierra bits and supplies 2 hubs for use with the kit...orrr you can if you fancy some more work. the focus setup can be made to fit the std beam with work but will also bolt to right onto a ZS beam. however beware your master cylinder will probs poo its pants if you put discs on the back with bigger stuff on the front.

brakes will fit mk3 and 3.5 the same..all they did was decide to put a smaller head (same thread on the bolts) on the later ones otherwise all good ;)

Jam

Author:  DANIELP1991 [ Mon Jul 14, 2008 2:51 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

wa size discs are these???

Author:  Luke1990 [ Mon Jul 14, 2008 6:40 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

DANIELP1991 wrote:
wa size discs are these???


278mm

Author:  DANIELP1991 [ Tue Jul 15, 2008 12:34 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

bigger than rs2000 ones then? i think they are 260mm

Author:  karlthomas [ Thu Jun 25, 2009 8:44 am ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

are they 15 rims inn the picS?

Author:  95 Fiesta Si [ Thu Jun 25, 2009 8:58 am ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

good guide lowsi.
hmmm Bognor Regis.....i spent all my summers there as a kid @ Middleton-on-sea with my nan :thumbsup:

Author:  woodsy_mv6 [ Thu Jun 25, 2009 9:36 am ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

karlthomas wrote:
are they 15 rims inn the picS?

Yup!!

Author:  DANIELP1991 [ Fri Jul 10, 2009 7:19 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

wat brake hoses do u have to use for these? si 1s?

Author:  will87 [ Thu Dec 31, 2009 10:01 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

did you keep the si servo and master cylinder?

I Want these brakes, can seem to find an st150 scraped anywhere though, what brakes will a normal mk6 fez have?

Author:  cj2009 [ Tue Jan 12, 2010 5:39 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

richard_p88 wrote:
I can confirm this guide also applies to the RS2000 260m setup. ;) Everything just swapped over and bolted up, couldn't be simpler.

Useful if your wheels have less clearance.

what size alloys do you have and what mk of escort are they from?

Author:  seanny 94 si [ Fri Apr 09, 2010 5:48 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to your si

will the callipers bolt straight into the brake line on the car as it is.

Author:  d00ner [ Tue Jun 15, 2010 2:19 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to you

will the standard master cylinder cope ok with uprated fronts?

Author:  onslack [ Tue Jun 15, 2010 3:31 pm ]
Post subject:  Re: lowsi's guide to fitting ST150 calipers and discs to you

yup will be fine :D

some people are upgrading to MK1 mondeo ones now, sure there's a guide about on how to do it, i'll have a look and see what i can find :thumbsup:

my bad i found a guide for fitting a MK1 mondeo servo

http://www.fiestaguides.co.uk/content/m ... inder.html

Page 2 of 2 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/