Fiesta-Si.com
http://www.fiesta-si.com/forums/

*New stainless steel rear anti rollbar brackets*
http://www.fiesta-si.com/forums/viewtopic.php?f=10&t=20085
Page 1 of 5

Author:  Dave G fsi [ Mon Jul 05, 2010 10:53 am ]
Post subject:  *New stainless steel rear anti rollbar brackets*

As some of you may know by now, ford in their wisdom have stopped making the rear anti rollbar brackets for the mk3 fiesta and as they rust away and break causing the car to fail its MOT, this is a bit of an issue!

AshSi, however, has managed to find a guy who will make stainless steel ones (which are actually better than the ford ones) as can be seen in the pics below.

Image
Image
Image

As you can see they are very very good replica parts and ideal if your car fails an MOT on these brackets.

Basically, if we can get a few people interested in this we can get them done cheaper or if not, you can post up here and we can get some made up and sent to you.

Prices are £6 each if they are bought separately.

Post up here if you are interested :thumbsup:

Author:  SLEEMAN [ Mon Jul 05, 2010 11:06 am ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

what about bulk discount say for example i need 8 of em lol. for a twin rear anti roll bar setup?

Author:  AshSi [ Mon Jul 05, 2010 11:13 am ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

yeah i reckon i could sort something out, if i can get as many people to post up how many they need, then i will work the pricing out :) usually takes about 3-4 days obviously depends on how many there is, then 2-3 days for postage, obviously these arnt light items when your having 8 so will have to weigh them at a post office but im expecting them to come to about £3 + for postage.

Author:  rs220bhp [ Mon Jul 05, 2010 1:33 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

Id be interested, is he making the 2 different types as the 2 where shocks bolt up have the spacer but the other ones dont?

Author:  AshSi [ Mon Jul 05, 2010 2:27 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

i can get what ever as long as i have a decent one as a pattern

Author:  onslack [ Mon Jul 05, 2010 5:12 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

good work there guys, good to see bits being re made :D

Author:  rs220bhp [ Mon Jul 05, 2010 5:28 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

Id be interested in a few sets/possibly 4. would need 2 with the spacer bit tacked on and 2 without it per set.

Author:  AshSi [ Mon Jul 05, 2010 9:59 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

ok if you get me an exact number.

Author:  fiestasiphil [ Tue Jul 06, 2010 6:16 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

id be up for some of these just for spares for both my cars and plan on keeping them for forever so i may need a good few sets :)

Author:  AshSi [ Tue Jul 06, 2010 10:02 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

right i will get some made up over the weekend say 20 of each then you can buy as many as you need.

Author:  happypaul [ Wed Jul 07, 2010 7:04 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

I'll have a full set, whatever ones I need I don't know, cant remember.

Author:  AshSi [ Wed Jul 07, 2010 8:16 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

lol so you want 4 of each is it ??

Author:  fiestasiphil [ Wed Jul 07, 2010 8:29 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

i will have 4 of each type :) 4 thick, 4 thin :)

Author:  SLEEMAN [ Wed Jul 07, 2010 9:08 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

is it good to use 4 thick brackets for the twin anti roll bar setup?? because wouldn't the bolt be spaced out too much??

Author:  AshSi [ Wed Jul 07, 2010 11:24 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

right phil will get it sorted over weekend. :) so once i have got it sorted the price will be £40 will see if i can get a discount as ill get a bulk lot made and say prob be £2-3 postage 1st class ?

Author:  jimbo3door [ Thu Jul 08, 2010 11:37 am ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

i need 4 of them can u lets us know how to get them

Author:  AshSi [ Thu Jul 08, 2010 12:28 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

yeah will do, seeing the welder tonight and will get a batch made up.

Author:  DanFraser [ Tue Jul 13, 2010 10:17 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

I'd like a set!

Author:  AshSi [ Wed Jul 14, 2010 12:00 am ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

just waiting for them now, getting about 40 made 20 of each. so ill post when i have them.

Author:  mattu101 [ Sat Jul 17, 2010 4:01 pm ]
Post subject:  Re: *New stainless steel rear anti rollbar brackets*

sign me up for a rear one :thumbsup:

Page 1 of 5 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/