Fiesta-Si.com
http://www.fiesta-si.com/forums/

Anyone wanna sell rs1800 ecu maf and inlet? lol
http://www.fiesta-si.com/forums/viewtopic.php?f=1&t=7898
Page 1 of 2

Author:  happypaul [ Fri Jul 20, 2007 10:34 pm ]
Post subject:  Anyone wanna sell rs1800 ecu maf and inlet? lol

Anyone wanna sell me an engine?

2.0 zetec anyone? ;)

Just wanted to get people to see my post so I'm being cheeky and putting it in general :rolleyes: :insanity:

Author:  Mattyboy Esq [ Sat Jul 21, 2007 2:24 pm ]
Post subject: 

its not 2.0l but its a RS1800 engine, buy it now £45 and its in scunthorpe!

http://cgi.ebay.co.uk/Ford-Fiesta-RS180 ... dZViewItem

;)

Author:  fiestasiphil [ Sat Jul 21, 2007 2:31 pm ]
Post subject: 

nice bargin that!! :)

Author:  happypaul [ Sat Jul 21, 2007 6:25 pm ]
Post subject: 

RS1800 engine and gearbox shall be collected this week ;)

Does anyone know what ecu the rs1800 uses?

And I need an inlet HO thingy and MAF

Author:  luke89 [ Sat Jul 21, 2007 7:46 pm ]
Post subject: 

rs1800 rusn 130ps ecu but with external edis lol

how bout a st170 inlet some tb's and squirt lol

Author:  happypaul [ Sat Jul 21, 2007 7:56 pm ]
Post subject: 

luke89 wrote:
rs1800 rusn 130ps ecu but with external edis lol

how bout a st170 inlet some tb's and squirt lol


So which ecu would that be?...

st170 inlet with tb's does sound sexy, how much you want for em? lol

Author:  Raymondo [ Sat Jul 21, 2007 9:55 pm ]
Post subject: 

happypaul wrote:
Does anyone know what ecu the rs1800 uses?


You have two options here. The earlier RS1800 used external EDIS, but the later Mk3.5 ones used internal edis so will plug straight into an Si loom.

I cant remember the exact codes but they are something similar to 2FCA, but dont quote me on that beacause that is almost definatley wrong, both ECU's have a very simiar code.

Author:  happypaul [ Sat Jul 21, 2007 10:07 pm ]
Post subject: 

Raymondo wrote:
happypaul wrote:
Does anyone know what ecu the rs1800 uses?


You have two options here. The earlier RS1800 used internal EDIS, but the later Mk3.5 ones used internal edis so will plug straight into an Si loom.

I cant remember the exact codes but they are something similar to 2FCA, but dont quote me on that beacause that is almost definatley wrong, both ECU's have a very simiar code.


So I would need the later one to plug and play in the Si

Do you know what work is involved in using an older ecu with internal edis?

Author:  Raymondo [ Sat Jul 21, 2007 10:31 pm ]
Post subject: 

Ive written that wrong, i meant to say the early ones had external EDIS, late ones internal. I think you woud have to change the whole loom to use the early type ecu

EDIT; Early ECU's (External EDIS) are 2FCD and ALSO
Late ECU's (Internal EDIS) are CULT

Author:  happypaul [ Sun Jul 22, 2007 12:37 am ]
Post subject: 

Raymondo wrote:
Ive written that wrong, i meant to say the early ones had external EDIS, late ones internal. I think you woud have to change the whole loom to use the early type ecu

EDIT; Early ECU's (External EDIS) are 2FCD and ALSO
Late ECU's (Internal EDIS) are CULT


Ahhh I see, cheers for the info mate :)

Author:  luke89 [ Sun Jul 22, 2007 12:55 am ]
Post subject: 

just a tip will save u some truble if you look about , iv converted internal to external twice now ;) made an extra bit and no rs1800 come with internal edis :cry: nor did the 130ps escorts ( that i sen and i had 3 ) but a mondeo is 136 ps ;)

Author:  happypaul [ Sun Jul 22, 2007 1:15 am ]
Post subject: 

I have read somewhere else that the mk3.5 rs1800 ecu will work on the si loom.

what ecu did you use? and how hard is it to convert?

Author:  fiestasiphil [ Sun Jul 22, 2007 11:46 am ]
Post subject: 

another person to ask would be cookie456the2nd he has a rs1800 lump in his si :)

Author:  lowsi [ Sun Jul 22, 2007 12:54 pm ]
Post subject: 

i bet you a 2.0 ecu would run the engine fine :lol: :lol: , just whack a 2.0 maf and injectors in there too :lol: :lol:

Author:  happypaul [ Sun Jul 22, 2007 7:18 pm ]
Post subject: 

Hopefully getting hold of the CULT ECU and MAF this week, as well as the HO inlet

So, a few new little parts and cambelt, a paint and then the engine is off in, so give me a few weeks and the Si should be running :D

Author:  james_rs [ Mon Jul 23, 2007 2:59 pm ]
Post subject: 

Im pretty dam sure that the later rs were internal EDIS.

And CULT rings a bell, so it must be that ecu as ray said.

In my old SI i took a gamble with a 1.8 mondy ECU and MAF on ebay. Code was BLOB, plugged and played, powered delivery was smoother as well. Was quite good on fuel. (as good as any fez gets...)

With 1.8 with 130 spec cams, xr2i inlet, rs tb, decat, and the above ecu and maf, it made 123bhp on rolers.

Author:  sireppin [ Mon Jul 23, 2007 3:03 pm ]
Post subject: 

got an rs1800 exhaust manfiold if ya intrested

Author:  happypaul [ Mon Jul 23, 2007 3:25 pm ]
Post subject: 

sireppin wrote:
got an rs1800 exhaust manfiold if ya intrested


already got one, but I could do with a downpipe..

Author:  happypaul [ Mon Jul 23, 2007 3:26 pm ]
Post subject: 

cookie456_the2nd wrote:
Im pretty dam sure that the later rs were internal EDIS.

And CULT rings a bell, so it must be that ecu as ray said.

In my old SI i took a gamble with a 1.8 mondy ECU and MAF on ebay. Code was BLOB, plugged and played, powered delivery was smoother as well. Was quite good on fuel. (as good as any fez gets...)

With 1.8 with 130 spec cams, xr2i inlet, rs tb, decat, and the above ecu and maf, it made 123bhp on rolers.


Ah cool, so if I cant get hold of CULT for now I'd be able to use a 1.8 mondy ecu for abit

Author:  dewz1789 [ Wed Sep 26, 2012 10:17 pm ]
Post subject:  Re:

luke89 wrote:
rs1800 rusn 130ps ecu but with external edis lol

how bout a st170 inlet some tb's and squirt lol







does the ofab ecu plug strait in to fiesta si loom ?

Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/